Cisco 7941 Phone Issues

[IKWeb]

Hello All

Well after spending hours working out how to send a config to a Cisco 7941 I have managed it..

One problem tho, the routing of calls etc works fine, but I cant get the handset on the phone to work... when it calls I can only answer calls by speaker, and also make calls this way. Below is my config, if anyone can help I would be very very greatful.

<device>
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>admin</sshUserId>
<sshPassword>cisco</sshPassword>
<devicePool>
<dateTimeSetting>
<dateTemplate>D-M-Y</dateTemplate>
<timeZone>Greenwich Standard Time</timeZone>
<ntps>
<ntp>
<name>130.88.203.12</name>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>192.168.0.59</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<enableVad>false</enableVad>
<preferredCodec>g711</preferredCodec>
<natEnabled></natEnabled>
<phoneLabel>Danny Office</phoneLabel>
<sipLines>
<line button="1">
<featureID>9</featureID>
<featureLabel>100</featureLabel>
<proxy>192.168.0.59</proxy>
<port>5060</port>
<name>100</name>
<displayName>100</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>100</authName>
<authPassword>100</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messagesNumber>800</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>200</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>192.168.0.59</proxy>
<port>5060</port>
<name>101</name>
<displayName>101</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>101</authName>
<authPassword>101</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messagesNumber>800</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>200</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<dialTemplate>dialplan.xml</dialTemplate>
</sipProfile>
<userLocale>
<name>English_United_Knigdom</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_Knigdon</networkLocale>
<networkLocaleInfo>
<name>United_Knigdom</name>
</networkLocaleInfo>
<commonProfile>
<phonePassword></phonePassword>
</commonProfile>
<directoryURL></directoryURL>
<servicesURL></servicesURL>
</device>

 

[miro]

Hi,

when you lift your handset on phone is there any change on phone display (enter number), can you even enter the number,if you can what happen when you press dial ? Did you check your cable on headset


PS.

We also have 7941, 7911, 7912 they all work like a charm .

Best regards