Cisco 7970 SIP

[Jamie Bennett]

Hello all! After a lot of blood, sweat, tears, and five packs of smokes, I finally was able to get the 7970 to work on my 3cx server. Just a few things missing that I was hoping for some advice on to get up and running.

The first item on the list is the phone directory.
Second is Services
Third is a new background image.
and finally messages button. The messages button for the voice mail seems to kinda work. Meaning I can press it and it shows the voice mail icon. However, when I press the icon on the screen or even select with the button, it does nothing but show a message at the bottom saying "Select Service" Granted this did not happen with SIP 8.2, and is only happening at 8.5. I may upgrade further to see if these issues correct themselves.

My config file for your viewing horror.

<device>
<deviceProtocol>SIP</deviceProtocol>
<sshUserId>root</sshUserId>
<sshPassword>root</sshPassword>

<devicePool>
<dateTimeSetting>
<dateTemplate>D/M/YA</dateTemplate>
<timeZone>Eastern Standard/Daylight Time</timeZone>
<ntps>
<ntp>
<name>103.28.56.14</name>
<ntpMode>Unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<ethernetPhonePort>2000</ethernetPhonePort>
<sipPort>5060</sipPort>
<securedSipPort>5061</securedSipPort>
</ports>
<processNodeName>192.168.0.174</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>

<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<callForwardURI>x-cisco-serviceuri-cfwdall</callForwardURI>
<callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
<callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
<callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
<meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
<abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
<rfc2543Hold>false</rfc2543Hold>
<callHoldRingback>2</callHoldRingback>
<localCfwdEnable>true</localCfwdEnable>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>0</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>3600</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>true</remotePartyID>
<userInfo>None</userInfo>
</sipStack>
<autoAnswerTimer>1</autoAnswerTimer>
<autoAnswerAltBehavior>false</autoAnswerAltBehavior>
<autoAnswerOverride>true</autoAnswerOverride>
<transferOnhookEnabled>false</transferOnhookEnabled>
<enableVad>false</enableVad>
<preferredCodec>g729a</preferredCodec>
<dtmfAvtPayload>101</dtmfAvtPayload>
<dtmfDbLevel>3</dtmfDbLevel>
<dtmfOutofBand>avt</dtmfOutofBand>
<alwaysUsePrimeLine>false</alwaysUsePrimeLine>
<alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
<kpml>3</kpml>
<phoneLabel>Nightlund</phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<callStats>false</callStats>
<silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
<startMediaPort>16384</startMediaPort>
<stopMediaPort>32766</stopMediaPort>

<sipLines>
<line button="1">
<featureID>9</featureID>
<featureLabel>Office</featureLabel>
<proxy>192.168.0.174</proxy>
<port>5060</port>
<name>001</name>
<displayName>Office</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>001</authName>
<authPassword></authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>1</messageWaitingLampPolicy>
<messagesNumber>666</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>001</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>

<line button="2">
<featureID>002</featureID>
<featureLabel>Carrie</featureLabel>
<speedDialNumber>002</speedDialNumber>
</line>

<line button="3">
<featureID>003</featureID>
<featureLabel>KaeLynn</featureLabel>
<speedDialNumber>003</speedDialNumber>
</line>

<line button="4">
<featureID>004</featureID>
<featureLabel>Server Room</featureLabel>
<speedDialNumber>004</speedDialNumber>
</line>

<line button="5">
<featureID>005</featureID>
<featureLabel>Jamie</featureLabel>
<speedDialNumber>005</speedDialNumber>
</line>

<line button="6">
<featureID></featureID>
<featureLabel></featureLabel>
<speedDialNumber></speedDialNumber>
</line>

</sipLines>

<voipControlPort>5060</voipControlPort>
<dscpForAudio>184</dscpForAudio>
<ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
<dialTemplate>dialplan.xml</dialTemplate>
</sipProfile>

<commonProfile>
<phonePassword></phonePassword>
<backgroundImageAccess>true</backgroundImageAccess>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>

<CiscoIPPhoneImageList>logo_url: "http://192.168.0.174:5000/provisioning/i4clk8e7kxh/logo/cisco9740.bmp"</CiscoIPPhoneImageList>


<loadInformation>SIP70.8-5-2S</loadInformation>

<vendorConfig>
<disableSpeaker>false</disableSpeaker>
<disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
<pcPort>0</pcPort>
<settingsAccess>1</settingsAccess>
<garp>0</garp>
<voiceVlanAccess>1</voiceVlanAccess>
<videoCapability>1</videoCapability>
<autoSelectLineEnable>0</autoSelectLineEnable>
<webAccess>1</webAccess>
<daysDisplayNotActive>2,3,4,5,6</daysDisplayNotActive>
<displayOnTime>08:00</displayOnTime>
<displayOnDuration>14:00</displayOnDuration>
<displayIdleTimeout>00:10</displayIdleTimeout>
<spanToPCPort>1</spanToPCPort>
<loggingDisplay>1</loggingDisplay>
<loadServer></loadServer>
</vendorConfig>

<versionStamp>1136931633-57191cee-5ffc-4342-b286-4246b4991890</versionStamp>

<userLocale>
<name>English_United_States</name>
<uid>1</uid>
<langCode>en_US</langCode>
<version>1.0.0.0-1</version>
<winCharSet>iso-8859-1</winCharSet>
</userLocale>

<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
<uid>64</uid>
<version>1.0.0.0-1</version>
</networkLocaleInfo>

<deviceSecurityMode>1</deviceSecurityMode>
<authenticationURL></authenticationURL>
<directoryURL>directory_url: "http://192.168.0.174:5000/provisioning/i4clk8e7kxh/directory.xml"</directoryURL>
<idleURL></idleURL>
<informationURL></informationURL>
<messagesURL>999</messagesURL>
<proxyServerURL></proxyServerURL>
<servicesURL>http://192.168.0.174/services.xml</servicesURL>
<dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>4</transportLayerProtocol>
<capfAuthMode>0</capfAuthMode>
<capfList>
<capf>
<phonePort>3804</phonePort>
<processNodeName>ccm-beta-5-1</processNodeName>
</capf>
</capfList>

<certHash></certHash>
<encrConfig>false</encrConfig>
</device>

The 7960's are a heck of a lot easier to configure and have no issues with those.

Thank you in advance.

 

[Jamie Bennett]

*update*
SIP70.8-2-1SR2S is the only stable version that seems to work better than the newest ones I have tried. It is still not without its flaws but at least the phone is able to call in and out. Still need advice with the previous mentioned items.