Conference phone - Wi-Fi or DECT, Battery Powered

[AccelUser]

We will be deploying a 3CX v16 system and have a rather strict requirement for battery powered Wi-Fi or DECT conference phones. We couldn't find a 3CX supported conference that met these requirements. However, since we will be using Yealink phones, we looked at the Yealink CP930W-Base DECT conference phone that should fit the bill: https://www.yealink.com/products_129.html.
It uses the W60B base station which is supported by 3CX when using certain DECT handsets. So, we have a couple of questions...Has anyone on this forum had any experience using this particular model and/or has anyone developed a custom template for this model?
Any suggestions would be appreciated.

 

[JohnS_3CX]

Hi @AccelUser

The W60P base is supported, but only for these specific models you see here.
https://www.3cx.com/sip-phones/yealink-dect-w52p/

There's no guarantee that the specific model will work so you might have to get one on loan to test it before purchasing.

 

[Saqqara]

Can confirm that the cp930w works with 3cx

No need for template , as you setup the base unit within 3cx The unit uses all the settings configured on the base unit I.e. address book

 

[AccelUser]

Thank you for the replies. We went ahead and ordered one for testing.