Don´t use 1.1.6.44 Firmware on GXP-2020 (Workaround found)

[silentfun]

Don´t use 1.1.6.44 Firmware on GXP-2020 it is pure horror.

not getting ip by dhcp

freezing

with fixed ip it don´t register account 1 (all other he register)

to get back you have to put in fixed ip and downgrade it best to 1.1.6.16

if the account 1 allready don´t register u have to reset factory defaults -> config ->Factory Reset -> (enter MAC) push softkey OK

shame on you Grandstream

shame on me for update all phones at the same time - ( all release before i test over a week before i updated the other phones)

hope this will help you

 

[silentfun]

Re: Don´t use 1.1.6.44 Firmware on GXP-2020

the problem is solved

the not getting a ip with 1.1.6.44 Firmware is solved#

it is depending on QLayer 2 QoS - if you put in value 6

same problem whit some other firmware

if the network don´t start you can not programm it via brouwser but manual from phone