Solved Error is 0X0

[daveh82]

New to 3cx, I have downloaded and installed the most recent version of the software. I followed the instructions at:
http://www.3cx.com/sip-phones/polycom-soundpoint-450-550-560-650-670/

However, I get the following error when the phone is provisioning:

Config File Error
Error is 0x0

I also at one point received this error, but just one time:

Config File Error
2345-1200-001.sip.ld

The phone is now in a continuous loop. Any feedback would be greatly appreciated.

 

[MRM]

Hi Dave,

Looks like you have to do a factory reset on your unit to stop the looping.

Please update the post on your findings and if you managed to solve the issue we would be grateful if you could share it with the community.

Regards

 

[daveh82]

Hello,

I have reset the phone several times. Using 4,6,8,* Seems to work and reboots. The same problem still persists. This is what the phone does:

1. Phone powered on (after factory reset)
2. Welcome Screen (4 seconds to auto boot, etc)
3. Waiting for network to initialiize
4. Updating initial application
5. Checking Application
6. Loading Application
6. Running... App = sip.ld
7. Welcome! Processing configuration This may take a few seconds IP Address 192.16.0.105 Enet: 00 04 f2 c5 18 0b Rev: 3.2.2.0477
8. Config file error Error is 0x0
9. Phone reboots and repeats same process

I have followed the instructions exactly. I would expect firmware needs to be different than 3.2.2.0477 but not sure why this is not working correctly. Thanks.

 

[YiannisH_3CX]

If option 66 doesn't work for you try the manual way found in the following guide and let us know it if works for you
http://www.3cx.com/sip-phones/manually-provision-polycom-soundstation/

 

[daveh82]

Okay guys. I thought I changed my option 66 path, but apparently I clicked the cancel button instead of okay button. I changed option 66 and everything worked perfectly. Thanks!

 

[GiannosC_3CX]

Glad to hear the issue is resolved and thanks for sharing.