- Joined
- Apr 2, 2019
- Messages
- 45
- Reaction score
- 1
Pointing to the Post i am in the position to deal with the same problem.
I know i could do a workarround, but that is really hard, as long as 3cx does not offer a cli to create rules via a script, i don't mean new installations, for new installations the use of the setupscript could work. I mean for a allready running 3cx PBX.
If you create a bridge and enter mobilphone/ phone details for the extensions, this will allways be shown as "Bridge prefix" + "number".
We could create a workaround by creating around 250 outbound rules, but this is not the way we wan't to work.
I know i could do a workarround, but that is really hard, as long as 3cx does not offer a cli to create rules via a script, i don't mean new installations, for new installations the use of the setupscript could work. I mean for a allready running 3cx PBX.
If you create a bridge and enter mobilphone/ phone details for the extensions, this will allways be shown as "Bridge prefix" + "number".
We could create a workaround by creating around 250 outbound rules, but this is not the way we wan't to work.
