I can't register the GXW4104

[carlosar]

I can't register the GWX4104

I tried several times to register it, followed all the steps, revised all the conections, checked the server, upgraded the firmware, checked the password for all the lines, the server has 2 phones registered already, all IP adress are ok, I tried with two differents servers everything is in the right way but still doesn't get registered. This is a test that I'm doing at home and I wan't to isntall it at the office so if it works I'll install it on all the offices. But I'm stucked in something that I think it's so simple. Please help me out!!!

Thanks in advance.

 

[RobLloyd]

Can you post the server status log when it tries to register. That will help us out to see what's going on. Could be a number of things.

 

[carlosar]

Ok, meanwhile I was trying to register them I recieve a call and surprisingly it register by itself. But the thing is I can't make calls.
This is the log:
20:13:53.838 Call::RouteFailed [CM503014]: Call(24): Attempt to reach [sip:[email protected];user=phone] failed. Reason: Not Registered
20:13:53.833 Call::RouteFailed [CM503014]: Call(24): Attempt to reach [sip:[email protected];user=phone] failed. Reason: Not Registered
Please note that I want to call to this external number:04166061235.
The rule is done. Its made like this: calls that starts with 0 Route 1: GXW4104 remove 1 digit. Please note that maybe differs the words cause is in another language. but I'm pretty sure is well done. I followed all the rules. Its like it tries to connet to another extension that doesn't exist.
Other curious thing is that even that I can register the soft phones at the PBX and I can make calls. I cannot recieve at them. This is the log:
[CM503003]: Call(2): Call to sip:[email protected]:5060 has failed; Cause: 408 Request Timeout; internal