Inbound Direct SIP

[JonnyM]

Having a bit of trouble with this, hoping someone can help.

I've followed the instructions in the blog post (http://www.3cx.com/blog/voip-howto/direct-sip/), and the calls seem to be arriving at my 3CX install, but with the following error:

10-Jul-2014 20:46:58.859   [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
Invite-UNK Recv Req INVITE from 198.22.64.214:47223 tid=c5f09852d1b0bccd8c099d01bc52bf63 [email protected]:
INVITE sip:[email protected] SIP/2.0

Domain.co.uk is the same as the one entered as the local SIP domain in Settings > Advanced. 'enquiries' exists as the SIP ID on an extension.

I'm a bit stumped as all the source identification seems to be set on providers, which aren't a thing that exists when using direct SIP.

Any ideas?

 

[IliasL_3CX]

Hi Jonny

Review the following link which will assist you with the source identification issue that you are experiencing: http://www.3cx.com/blog/docs/source-identification-issues/

Best Regards

 

[JonnyM]

Thanks, turns out it was E164.org not being able to dial calls properly. I tried from a random host with MicroSIP and it worked perfectly.