- Joined
- Apr 23, 2007
- Messages
- 23
- Reaction score
- 0
Well,
I had this issue before and was resolved when I loaded previous version. I loaded new version (2434) and I got it again. Here is what happens.
Incoming calls no audio. If I place the call on hold then pick it up again the audio is there until 30 seconds when the call drops. I will place my firewall / NAT settings but this has not been changed. One thing I notice is that my STUN used to resolve to address:5060 now its a number in the 10000's. Also, I am getting Cant send RTP stream to 0.0.0.0:10000.
All outgoing calls work well. I have listed below my firewall settings followed by logs of one incoming and one outgoing call for review. Thanks for the help.
Kevin
# Service Name Start Port End Port Server IP Address
1 VOIP-TFTP 69 69 192.168.1.2
2 VOIP-SIP 5060 5061 192.168.1.2
3 VOIP-RTP 8000 9998 192.168.1.2
4 PBX 5480 5482 192.168.1.2
5 VOIP-STUN 3478 3478 192.168.1.2
6 VOIP-INTERNAL 7000 7500 192.168.1.2
7 VOIP_VOICE 10000 20000 192.168.1.2
outgoing call and STUN
09:02:22.328 StunClient:
rocess [CM115002] STUN resolved external IP=71.251.126.83:19604 by server 64.69.76.23
08:57:53.156 StratInOut:
nHangUp [CM104007] Call(32): Call from Ext.301 to 17325171151 has been terminated by Ext.301; cause: CANCEL; from IP:192.168.1.6
08:57:21.562 CallConf:
nProvisional [CM103003] Call(32): Ln:10000@junction is ringing
08:57:18.093 CallConf:
nIncoming [CM103002] Call(32): Incoming call from 301 (Ext.301) to sip:[email protected]
incoming call
08:49:45.781 MediaServerReporting::RTPReceiver [MS105000] Call(30) Ext.301: No RTP packets were received on 0000003B@:remoteAddr=192.168.1.6:16466,extAddr=0.0.0.0:0,localAddr=192.168.1.2:7058
08:49:45.765 StratLink:
nHangUp [CM104001] Call(30): Ext.301 hung up call; cause: BYE; from IP:192.168.1.6
08:49:45.640 CallLegImpl:
nConnected [CM103001] Call(30): Created audio channel for Ln:10000@junction (66.227.100.16:10878) with Media Server (71.251.126.83:10058)
08:49:45.625 StratInOut:
nConnected [CM104005] Call(30): Setup completed for call from Ext.301 to Ln:10000@junction
08:49:45.625 CallLegImpl:
nConnected [CM103001] Call(30): Created audio channel for Ext.301 (192.168.1.6:16466) with Media Server (192.168.1.2:7058)
08:49:20.265 CallConf:
nProvisional [CM103003] Call(30): Ln:10000@junction is ringing
08:49:17.843 CallConf:
nIncoming [CM103002] Call(30): Incoming call from 301 (Ext.301) to sip:[email protected]
I had this issue before and was resolved when I loaded previous version. I loaded new version (2434) and I got it again. Here is what happens.
Incoming calls no audio. If I place the call on hold then pick it up again the audio is there until 30 seconds when the call drops. I will place my firewall / NAT settings but this has not been changed. One thing I notice is that my STUN used to resolve to address:5060 now its a number in the 10000's. Also, I am getting Cant send RTP stream to 0.0.0.0:10000.
All outgoing calls work well. I have listed below my firewall settings followed by logs of one incoming and one outgoing call for review. Thanks for the help.
Kevin
# Service Name Start Port End Port Server IP Address
1 VOIP-TFTP 69 69 192.168.1.2
2 VOIP-SIP 5060 5061 192.168.1.2
3 VOIP-RTP 8000 9998 192.168.1.2
4 PBX 5480 5482 192.168.1.2
5 VOIP-STUN 3478 3478 192.168.1.2
6 VOIP-INTERNAL 7000 7500 192.168.1.2
7 VOIP_VOICE 10000 20000 192.168.1.2
outgoing call and STUN
09:02:22.328 StunClient:
08:57:53.156 StratInOut:
08:57:21.562 CallConf:
08:57:18.093 CallConf:
incoming call
08:49:45.781 MediaServerReporting::RTPReceiver [MS105000] Call(30) Ext.301: No RTP packets were received on 0000003B@:remoteAddr=192.168.1.6:16466,extAddr=0.0.0.0:0,localAddr=192.168.1.2:7058
08:49:45.765 StratLink:
08:49:45.640 CallLegImpl:
08:49:45.625 StratInOut:
08:49:45.625 CallLegImpl:
08:49:20.265 CallConf:
08:49:17.843 CallConf: