ITSP just doesnt work with the system any longer.

Status
Not open for further replies.

giovanni0826

Joined
Apr 6, 2007
Messages
53
Reaction score
0
one of the providers i've been using all a sudden doesn't work properly through the 3cx. no upgrades have been done, no system changes have been completed recently. the provider is VArphonex. this is the issue; incoming calls connect through the 3cx to DR to extension just fine but after 20 or so seconds the call is disconnected. this is the message when it happens.

13:04:13.203 StratLink::onHangUp [CM104001] Call(7): Ln:10000@VAR hung up call; cause: unknown

outbound calls are no problem. they complete and stay up.

the service provider works properly both ways when configured with a softphone.
this is a call log of a failure.

13:16:13.343 StratLink::onHangUp [CM104001] Call(8): Ln:10000@VAR hung up call; cause: unknown
13:15:54.765 CallLegImpl::onConnected [CM103001] Call(8): Created audio channel for Ext.1100 (192.168.2.253:8186) with Media Server (192.168.2.1:7008)
13:15:54.765 StratInOut::onConnected [CM104005] Call(8): Setup completed for call from Ln:10000@VAR to Ext.1100
13:15:54.125 CallConf::onProvisional [CM103003] Call(8): Ext.1100 is ringing
13:15:50.312 MediaServerReporting::DTMFhandler [MS211000] Call(8) Ln:10000@VAR: DTMF (RTP) from 208.239.76.163:59162 arrived. in-band DTMF tone detection is turned off.
13:15:41.250 CallLegImpl::onConnected [CM103001] Call(8): Created audio channel for Ln:10000@VAR (208.239.76.163:59162) with Media Server (my.public.ip:9008)
13:15:41.234 CallConf::onIncoming [CM103002] Call(8): Incoming call from 954585xxxx (Ln:10000@VAR) to sip:[email protected]


varphonex support isn't any help. does any have a clue what the issue.
 
Hi,

Just describe VoIP provider option configured in PBX.

Thanks,
Stepan
 
Status
Not open for further replies.

Forum statistics

Threads
111,913
Messages
589,706
Members
164,783
Latest member
GothamUser