Linksys SPA-3102_unable to configure

[MikeMelga]

Hi.

I am using 3CX for some time now. I have a analog gateway (SPA-3102), a GSM gateway (Portech MV372) and 2 voip lines. Everything is working ok but one of the things I still haven't been able to do is properly configure the SPA-3102.

Currently I am able to both receive and make calls in 3CX using the SPA-3102 with no problem.

My problem is that I have an analog phone connected to the SPA-3102 that I never got it to work.

Can I have that analog phone configured as an extension? What I would like to do is be able to dial and receive calls on that phone.

How can I do that?

I had some help some time ago here:
http://www.3cx.com/forums/integrating-ata-gateway-and-2-ata-phones-33055.html
but never got it work

Can someone help?

Thanks.

 

[business44]

Leejor, I plugged in the ethernet cable into the blue internet port and powered cycled the 3102. Still no joy. I am going to try a Cisco SPA 112 to see if that works. Not sure why the 3102 won't work as a remote extension. I know alot of people have gotten them to work.

 

[business44]

Ok, I figured out the problem. It actually wasn't a problem with the 3102 or the SPA 112. The issue was with my Cisco ASA 5505 firewall. I did not have SIP packet inspection enabled. Once I enabled packet inspection the Cisco SPA 112 registered right away. Hope this helps someone.