no dtmf tones when calling out

[webguyz]

Have the Skype Gateway working well, but when using it I can not generate touch tones when going to a site like an online pharmacy. Have the latest version of 3CX and Skype Gateway.

Anyone else having this problem?

Thanks!

 

[leejor]

What device, ATA/VoIP phone are you generating the tones with? Sometimes changing the way the device sends DTMF information , in-band, or as SIP messages, can make a difference. Someone found that certain analogue phones, when using an ATA, generate such a short burst that it doesn't get through. This was via a Gateway to the PSTN, but the principle may be the same.

 

[webguyz]

Using an ATA (PAP2). This same phone works fine when I access my other outbound Gateway, a SPA3102 connected to an Ooma Telo, and it generates touchtones without a problem leading me to believe its a Skype problem. Will take another look at the 3CX settings. If other people are getting touchtones using Skype gateway then it must be an issue on my side. Just wanted to make sure it wasn't a known issue.

Thanks!

 

[leejor]

I've personally have issues with DTMF not getting though an SPA3000 (or 3102) going to a Magicjack. The tones are there, but are too short a duration for the MJ to detect.

 

[Vali_3CX]

Have the Skype Gateway working well, but when using it I can not generate touch tones when going to a site like an online pharmacy. Have the latest version of 3CX and Skype Gateway.

Hi

As far as I can remember, Skype client cannot send DTMF (properly) to (some) PSTN numbers, at least in some older versions. To verify this, please do the following test:
- stop the gateway and from its console, for the corresponding channel, click the Skype button to open its corresponding Skype client.
- from this skype client, try to call the online pharmacy number and see if DTMF tones works ok - if not, there is the Skype problem, not involving the gateway.

Regards
vali

 

[caddlykid]

i am having the same problem with it seems that cannot send dtmf tone. when using skype client directly it can send dtmf but when i use 3cx softphone or the ata it cannot send dtmf tone. please help.

 

[g.moretti]

same issue here... calls made by skypeout doesn't send tones...
same number, called by pstn line with same ip phone, tones works fine
same number, called by skype client with same account and skypeout, tones works fine.

 

[mobidutch]

same issue here... calls made by skypeout doesn't send tones...
same number, called by pstn line with same ip phone, tones works fine
same number, called by skype client with same account and skypeout, tones works fine.

I was able to get this to work with my Cisco SPA525G phone by changing the DTMF method to "Inband".