Outbound Caller ID over a bridge

[pkostovasilis]

We have a customer with two 3cx in bridge mode.
The 3cx in HQ has 4 sip trunks accounts.
All outbound calls from the Branch Office are routed to the HQ 3cx so they can flow through the SIP TRUNKS.
The extensions that exist in the HQ installation can show the correct Outbound caller ID (set in the extension's respective field)
The extensions from the Branch Office can only show the main trunk number of the sip trunk on their Outbound calls.
Is there a way to pass outbound caller ID over the bridge?
Best regards,

 

[eddv123]

There are some points in this string here which should hopefully cover it for you:

https://www.3cx.com/community/threads/caller-id-from-bridge-connections-need-name-extension.32521/

 

[YiannisH_3CX]

Hello @pkostovasilis

Please note that this is currently not possible. I would recommend posting this as a feature request to our ideas section of the forum https://www.3cx.com/community/forums/3cx-ideas/ . All posts are reviewed by their corresponding Departments and, if feasible and voted for by other users as well, may be implemented in an upcoming service pack or update.

 

[pkostovasilis]

Dear eddv123, thank you for your time but i don't think this suits my case
Dear Yiannis, thank you for answering, I searched the ideas section and found two exact threads, so i didn't start a new one, i just liked and rated the two threads. I hope it still counts.
Best regards and have a great new year

 

[YiannisH_3CX]

Dear Yiannis, thank you for answering, I searched the ideas section and found two exact threads, so i didn't start a new one, i just liked and rated the two threads. I hope it still counts.
Best regards and have a great new year

Glad we could assist. The more votes an idea gets the more likely is to get implemented. A great new year to you too.