Hi everybody from 3CXsupport,
I used the button "Generate config file" and imported the file in my Patton SmartNode 4634 (Patton Software Version : R4.2 2008-01-17 H323 SIP BRI).
The following errors occures:
1970-01-01T01:00:30 : LOGWARNING : Config: Line 95: SN4634/3BIS/UI(if-sip)[IF_SIP_0]#route default dest-interface IF_ISDN_0
1970-01-01T01:00:30 : LOGWARNING : Config: % ^ Keyword mismatch
1970-01-01T01:00:30 : LOGWARNING : Config: Line 103: SN4634/3BIS/UI(if-sip)[IF_SIP_1]#route default dest-interface IF_ISDN_1
1970-01-01T01:00:30 : LOGWARNING : Config: % ^ Keyword mismatch
Then I changed the config to:
route call dest-interface IF_ISDN_0
route call dest-interface IF_ISDN_1
and it works.
Additionaly I added the following lines for callback with my VoIP-Phone:
context cs switch
national-prefix 00
international-prefix 000
I was positive surprised from the function to generate this config only with a mouseclick, so I think it would be perfect to correct this...
Regards
I used the button "Generate config file" and imported the file in my Patton SmartNode 4634 (Patton Software Version : R4.2 2008-01-17 H323 SIP BRI).
The following errors occures:
1970-01-01T01:00:30 : LOGWARNING : Config: Line 95: SN4634/3BIS/UI(if-sip)[IF_SIP_0]#route default dest-interface IF_ISDN_0
1970-01-01T01:00:30 : LOGWARNING : Config: % ^ Keyword mismatch
1970-01-01T01:00:30 : LOGWARNING : Config: Line 103: SN4634/3BIS/UI(if-sip)[IF_SIP_1]#route default dest-interface IF_ISDN_1
1970-01-01T01:00:30 : LOGWARNING : Config: % ^ Keyword mismatch
Then I changed the config to:
route call dest-interface IF_ISDN_0
route call dest-interface IF_ISDN_1
and it works.
Additionaly I added the following lines for callback with my VoIP-Phone:
context cs switch
national-prefix 00
international-prefix 000
I was positive surprised from the function to generate this config only with a mouseclick, so I think it would be perfect to correct this...
Regards
