Programming VM button to include userid?

[RobLloyd]

Is there a way to program the VM button on the phones to include 999 wait a bit and then dial the VM box #? I'm using SPA-942 phones if that helps any.
I tried putting in 999,100 but that didn't do anything. I would like to program it so it all you have to do is enter the password.

Thanks,

 

[5qg4]

The current version should be unable to do this option. This post may to post at Feature requests.

 

[SY]

Is there a way to program the VM button on the phones to include 999 wait a bit and then dial the VM box #? I'm using SPA-942 phones if that helps any.
I tried putting in 999,100 but that didn't do anything. I would like to program it so it all you have to do is enter the password.

Thanks,

If you configure you phone to dial 999 then send DTMFs corresponding to extension number and PIN (as requested by Voice Mail DR), it will work. Unfortunately, it doesn't supported by all phones

 

[philip]

it would be much better is the server would accept a call into the VM system from an extension without requiring the extension number. this is how almost all other voip pbx systems work.

 

[RobLloyd]

That would work too.

it would be much better is the server would accept a call into the VM system from an extension without requiring the extension number. this is how almost all other voip pbx systems work.