- Joined
- Mar 27, 2020
- Messages
- 184
- Reaction score
- 52
Hi there!
I have read on several posts that if a remote SBC is behind a firewall, then only the ports 5090 and 5001 should be opened and that's only for outgoing traffic. But I still have a couple of questions that I would like to be clarified:
With kind regards,
Angelos Pitsos
I have read on several posts that if a remote SBC is behind a firewall, then only the ports 5090 and 5001 should be opened and that's only for outgoing traffic. But I still have a couple of questions that I would like to be clarified:
- On none of the posts I found the port protocol was mentioned. I supposed it should be TCP and that's what I did. Tests I did in the weekend, when installed the firewall were just fine, making calls to and from my mobile phone. I have to note that the tests were via a Fanvil deskphone. But today I got complains from colleagues who were using a softphone (Windows 3CX app), that the other party didn't hear them. So I also opened the UDP protocol of these two ports and it looks like the problems were solved. Could someone confirm if opening of TCP & UDP 5090 & 5001 is what is needed for a remote SBC?
- Are there any other ports that I should open on our firewall? If yes, please also clarify if that should be incoming/outgoing and what protocol(s).
With kind regards,
Angelos Pitsos