Setting Up QOS

[qlxltd]

Im trying to understand the correct way to set up QOS on our routers. This is what I have done and I'm wanted to know if its correcty done?

We have 3cx running on local address 10.14.3.8

The router (Draytek Vigor 2800) is configured to the following open ports.

TCP 5060 - 5060
UDP 5060 - 5061
TCP 5090
UDP 9000 - 9015

The QOS Settings are set to 97% priority for the 3cx system

And in the Advanced Setup I created 3 rules

I have also changed the local address to "ANY" from "10.14.3.8" as we have remote extensions at other sites via OpenVPN

 

[qlxltd]

Just realised that traffic on the OpenVPN connection port 1195 for the remote extensions are not covered by the QOS

I guess I need 2 OpenVPN connections with one for Voip and the other for data and then add the Voip OpenVPN port number to the QOS port range.