Showing CallerNumber through IVR

[beuvema]

3CX 15.5 SP1 on Windows 8
Incoming Trunk Beronet
Outgoing Trunk Voipbuster
> Outbound Parameters:
- From : Display Name = "OriginatorCallerID" Original Caller number will be sent"
- From : User Part = "OriginatorCallerID" Original Caller number will be sent"
- From : Host Part = "GWHostPort" gateway/provider host/port"

Is it possible to keep showing the Callers Phonenumber when a call arrives through the incoming trunk, then goes into IVR80 then when 9 selected the call is forward to the mobile number of Extension e.g. 89

Currently the Mobile gets to see the number assigned to the outgoing trunk. Do I have to change OutGoing Rules on the Outgoing trunk?

 

[Panayiotis_3CX]

Hello @beuvema,

Please clarify, how is the call forwarded on the mobile number of ext 89?

Is it via the extension's forwarding rules, or via the "Ring my mobile simultaneously" option?

 

[beuvema]

This is done through the forwarding rules of the extension.

 

[Panayiotis_3CX]

@beuvema,

It would be better to first contact your VoIP provider, before making any changes to the SIP trunks Outbound Parameters.
Basically, you will need to clarify, if the provider allows you to change the caller ID assigned to you. If so, ask them to specify on which SIP field they expect the information.

After you have specified the above, you will need to change the specific SIP field to "OriginatorCallerID".

 

[beuvema]

Currently these are assigned:
- From : Display Name = "OriginatorCallerID" Original Caller number will be sent"
- From : User Part = "OriginatorCallerID" Original Caller number will be sent"
- From : Host Part = "GWHostPort" gateway/provider host/port"

I Will check with our provider to see if they support it.
Thx for your help on this!