Snom Phones Provisioning Issue with 3CX v16.0

[amrit]

Hi Folks,

I've just built the new 3CX V16.0 on Debian Hyper V Infrastructure, and I am not able to provision the SNOM 320 and M300 on the Local Network, where I have Yealink T41S and Cisco SPA502G provisioned without any issue. I've tried to provision the M300 phones with the following methods but no success.

https://www.3cx.com/sip-phones/manually-provision-snom-dect/

I've provisioned T41S by Plug and Play and worked without any issue.

I've tried to provisioned the SNOM phones with another 3CX v16 instance running on AWS through SBC but no luck.



Please advise.

Thanks Amrit Sandhu

 

[JohnS_3CX]

Please read the limitations of this base https://www.3cx.com/sip-phones/snom-m300-m700-dect/#h.8owp0itk5r99

You will have to disable SSL Transport and Ciphers under your management console Settings > Security

The Yealink supports these features so it provisioned without any issues.