The cloudest 3CX

[CoolW]

Hi.

I was wondering if you guys could help, I've setup a test server in azure and that's working fine but I just needed to clarify a few things, I've had a look around the forums but couldn't find anything definitive:

Is it possible to run a remote site with <30 users without a SBC?

Can you have multiple tunnels coming from one IP?

Are CTI features still only available via SBC for external users or can you use STUN or tunnel?



Cheers!

 

[leejor]

I can answer a couple...

Is it possible to run a remote site with <30 users without a SBC?

You will probably end up with a lot of (audio amongst other) issues if you try setting up a remote site of more than a couple of sets, and not using the SBC. You could try passing all audio back through the PBX, but, for a large site, it is a waste of bandwidth.

Can you have multiple tunnels coming from one IP?

A tunnel is to one remote IP, so , one IP at the server end, but you'd need multiple pubilc IP's at (one?) remote location to use more than one tunnel.

 

[YiannisH_3CX]

Are CTI features still only available via SBC for external users or can you use STUN or tunnel?

CTI is still only available via SBC for remote users i am afraid