ugrade to new 5.1

[kirimis]

evryting ok with new version beta exept forwarding i tried to give an internal call to another internal
and it could not tranfer and the internal i want to pass the line is stuck. the comes out like this

"11:23:51.511 MediaServerReporting::RTPReceiver :[MS105000] C:128.2: No RTP packets were received:remoteAddr=0.0.0.0:59000,extAddr=0.0.0.0:0,localAddr=100.100.100.253:7310
11:23:47.402 Call::Terminate :[CM503008]: Call(126): Call is terminated
11:23:47.402 Call::Terminate :[CM503008]: Call(126): Call is terminated
11:23:40.793 MediaServerReporting::RTPReceiver :[MS105000] C:127.1: No RTP packets were received:remoteAddr=0.0.0.0:59000,extAddr=0.0.0.0:0,localAddr=100.100.100.253:7304
11:23:40.793 MediaServerReporting::RTPReceiver :[MS105000] C:127.2: No RTP packets were received:remoteAddr=100.100.100.162:59000,extAddr=0.0.0.0:0,localAddr=100.100.100.253:7306
11:23:40.777 Call::Terminate :[CM503008]: Call(127): Call is terminated
11:23:19.325 Call::Terminate :[CM503008]: Call(128): Call is terminated
11:23:19.325 Call::Terminate :[CM503008]: Call(128): Call is terminated
11:23:11.154 MediaServerReporting::RTPSender :[MS004001] C:128.1: Can't send RTP stream to 1 destination unreachable
11:23:02.404 CallCtrl:nLegConnected :[CM503007]: Call(128): Device joined: sip:[email protected]:5060
11:23:02.341 CallCtrl:nLegConnected :[CM503007]: Call(128): Device joined: sip:[email protected]:5060
11:22:57.092 CallCtrl:nSelectRouteReq :[CM503004]: Call(128): Calling: Ext:145@[Dev:sip:[email protected]:5060]
11:22:56.998 CallCtrl:nIncomingCall :[CM503001]: Call(128): Incoming call from Ext.209 to [sip:[email protected]]
11:22:49.201 MediaServerReporting::RTPSender :[MS004001] C:127.2: Can't send RTP stream to 1 destination unreachable
11:22:28.155 CallCtrl:nLegConnected :[CM503007]: Call(127): Device joined: sip:[email protected]:5060
11:22:28.093 CallCtrl:nLegConnected :[CM503007]: Call(127): Device joined: sip:[email protected]:5060
11:22:24.140 CallCtrl:nSelectRouteReq :[CM503004]: Call(127): Calling: Ext:209@[Dev:sip:[email protected]:5060]
11:22:24.046 CallCtrl:nIncomingCall :[CM503001]: Call(127): Incoming call from Ext.222 to [sip:[email protected]]
"

what does this message means can somebody help?
11:22:49.201 MediaServerReporting::RTPSender :[MS004001] C:127.2: Can't send RTP stream to 1 destination unreachable

 

[blackburwood]

it s seems that 3cx v5 doesn t work whith freephonie, there is no rtp send and receive

Your provider doesn t help us with 3cx, may be it will be interessant that 3cx support could help us

at least , we could used the 3cx v3 but it s a shame !! this 3cx v 5 seems to be a great ipbx soft

 

[blackburwood]

hi all

if we try to use the 3cx v3 could we use the backup data from v5? i don t want to re install all the extensions

thanks

 

[blackburwood]

hi all

if we try to use the 3cx v3 could we use the backup data from v5? i don t want to re install all the extensions

thanks

for your information it s not possible to use the back data from v5 to v2 and from v2 to v5

 

[radiogen]

have you sort no sound issue with No RTP packets were received:remoteAddr ????? I have the same problem with my 3Com Router and Linksys PAP2 ATA. please advice?