Unknown system [CFGManager] tries to connect!

[lamsoft]

I am using 3CX Ver. 7 and I'm having a problem after used it a period of time.

There are two VOIP provider in my list, some days ago 3CX will automatically connect to the VOIP provider and show "Registered", but now even I reboot the system or 3CX System, it does not automatically register with the VOIP provider, when I manually click "refresh registration" in "VOIP Providers", the system log shows "22:37:16.015 Unknown system [CFGManager] tries to connect!"
what does it mean? how do i solve the problem, now i cannot use that VOIP provider as the system said me not yet register....

thanks

22:37:12.108|.\TuSelector.cxx(70)|Trace5|Resip|::ResipLogger:Stats message 
22:37:12.108|.\StatisticsMessage.cxx(152)|Trace5|Resip|::ResipLogger:RESIP:TRANSACTION
TU summary: 0 TRANSPORT 0 TRANSACTION 0 CLIENTTX 0 SERVERTX 1 TIMERS 1
Transaction summary: reqi 1277 reqo 0 rspi 0 rspo 927
Details: INVi 0/S0/F0 INVo 0/S0/F0 ACKi 0 ACKo 0 BYEi 0/S0/F0 BYEo 0/S0/F0 CANi 0/S0/F0 CANo 0/S0/F0 MSGi 0/S0/F0 MSGo 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 1277/S621/F306 REGo 0/S0/F0 PUBi 0/S0/F0 PUBo 0/S0/F0 SUBi 0/S0/F0 SUBo 0/S0/F0 NOTi 0/S0/F0 NOTo 0/S0/F0
Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0 PUBx 0 SUBx 0 NOTx 0
22:37:16.015|.\SLServer.cpp(824)|Log5||MyConnectionListener::ConnectListener:SL: connected lamsoft-server:0/CFGManager at [lamsoft-server:0]/CFGManager
22:37:16.015|.\SLServer.cpp(870)|Error1||??:Unknown system [CFGManager] tries to connect!

 

[SY]

I am using 3CX Ver. 7 and I'm having a problem after used it a period of time.

There are two VOIP provider in my list, some days ago 3CX will automatically connect to the VOIP provider and show "Registered", but now even I reboot the system or 3CX System, it does not automatically register with the VOIP provider, when I manually click "refresh registration" in "VOIP Providers", the system log shows "22:37:16.015 Unknown system [CFGManager] tries to connect!"
what does it mean? how do i solve the problem, now i cannot use that VOIP provider as the system said me not yet register....

thanks

22:37:12.108|.\TuSelector.cxx(70)|Trace5|Resip|::ResipLogger:Stats message 
22:37:12.108|.\StatisticsMessage.cxx(152)|Trace5|Resip|::ResipLogger:RESIP:TRANSACTION
TU summary: 0 TRANSPORT 0 TRANSACTION 0 CLIENTTX 0 SERVERTX 1 TIMERS 1
Transaction summary: reqi 1277 reqo 0 rspi 0 rspo 927
Details: INVi 0/S0/F0 INVo 0/S0/F0 ACKi 0 ACKo 0 BYEi 0/S0/F0 BYEo 0/S0/F0 CANi 0/S0/F0 CANo 0/S0/F0 MSGi 0/S0/F0 MSGo 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 1277/S621/F306 REGo 0/S0/F0 PUBi 0/S0/F0 PUBo 0/S0/F0 SUBi 0/S0/F0 SUBo 0/S0/F0 NOTi 0/S0/F0 NOTo 0/S0/F0
Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0 PUBx 0 SUBx 0 NOTx 0
22:37:16.015|.\SLServer.cpp(824)|Log5||MyConnectionListener::ConnectListener:SL: connected lamsoft-server:0/CFGManager at [lamsoft-server:0]/CFGManager
22:37:16.015|.\SLServer.cpp(870)|Error1||??:Unknown system [CFGManager] tries to connect!

It is the mistake in logging procedure. Please ignore this log message if "CFGManager" is the subject.
Thanks

 

[lamsoft]

I am using 3CX Ver. 7 and I'm having a problem after used it a period of time.

There are two VOIP provider in my list, some days ago 3CX will automatically connect to the VOIP provider and show "Registered", but now even I reboot the system or 3CX System, it does not automatically register with the VOIP provider, when I manually click "refresh registration" in "VOIP Providers", the system log shows "22:37:16.015 Unknown system [CFGManager] tries to connect!"
what does it mean? how do i solve the problem, now i cannot use that VOIP provider as the system said me not yet register....

thanks

22:37:12.108|.\TuSelector.cxx(70)|Trace5|Resip|::ResipLogger:Stats message 
22:37:12.108|.\StatisticsMessage.cxx(152)|Trace5|Resip|::ResipLogger:RESIP:TRANSACTION
TU summary: 0 TRANSPORT 0 TRANSACTION 0 CLIENTTX 0 SERVERTX 1 TIMERS 1
Transaction summary: reqi 1277 reqo 0 rspi 0 rspo 927
Details: INVi 0/S0/F0 INVo 0/S0/F0 ACKi 0 ACKo 0 BYEi 0/S0/F0 BYEo 0/S0/F0 CANi 0/S0/F0 CANo 0/S0/F0 MSGi 0/S0/F0 MSGo 0/S0/F0 OPTi 0/S0/F0 OPTo 0/S0/F0 REGi 1277/S621/F306 REGo 0/S0/F0 PUBi 0/S0/F0 PUBo 0/S0/F0 SUBi 0/S0/F0 SUBo 0/S0/F0 NOTi 0/S0/F0 NOTo 0/S0/F0
Retransmissions: INVx 0 BYEx 0 CANx 0 MSGx 0 OPTx 0 REGx 0 finx 0 nonx 0 PUBx 0 SUBx 0 NOTx 0
22:37:16.015|.\SLServer.cpp(824)|Log5||MyConnectionListener::ConnectListener:SL: connected lamsoft-server:0/CFGManager at [lamsoft-server:0]/CFGManager
22:37:16.015|.\SLServer.cpp(870)|Error1||??:Unknown system [CFGManager] tries to connect!

It is the mistake in logging procedure. Please ignore this log message if "CFGManager" is the subject.
Thanks

But the system not going to register the VOIP provider in the port/trunk status...
even i clicked manual registration....
thanks.

 

[SY]

At least one condition should be met: PBX must know IP address which can be used to register line on VoIP provider. Otherwise it is not possible even if you try to enforce PBX to do it...
Please check http://wiki.3cx.com regarding NAT, STUN, VoIP line configuration etc.

 

[lamsoft]

I found that 3cx is going to register the VOIP before it sends the request to STUN... is it normal? thanks

my server has 2 public interface, the ip 116.49.224.184 (dynamic) should be used, and it is detected by STUN, however 3CX is going to use 210.6.133.45 (static) only, this IP cannot route to outside network, thanks...

21:48:24.687|.\DevsMgr.cpp(196)|Trace5||DeviceRecord::updateTransport:Update: transp=sip:210.6.133.45:5060; mask=23; src=[ V4 213.192.59.75:5060 UDP target domain=unspecified mFlowKey=0 ]
21:48:24.687|.\DevsMgr.cpp(88)|Trace5||DeviceRecord:eviceRecord:New device record is created, id=iptel.org:5060, pbx=sip[email protected], tr=210.6.133.45, external
21:48:24.687|.\DevsMgr.cpp(548)|Trace5||DevsMgr::createDevice:Created new device: iptel.org:5060
21:48:24.687|.\DevsMgr.cpp(307)|Trace5||Device:evice:Created line lamsoft.sip@[iptel.org:5060]
21:48:24.687|.\DevsMgr.cpp(110)|Trace5||DeviceRecord::addLine:Added device [iptel.org:5060] for aor=<sip:[email protected]:5060>
21:48:24.687|.\Line.cpp(80)|Trace5||LineCfg::updatePredicate:Line 10001 has been updated from DB
21:48:24.687|.\Line.cpp(713)|Debug2||LineCfg::notifyPresence:Issue: [pres:10001;1;reg;9]
21:48:24.703|.\Service.cpp(207)|Trace5|CallManager|CServiceModule:reMessageLoop:>>>> PBX service started successfully <<<<
21:48:24.703|.\CM_Stack.cpp(166)|Trace5|SipStack|CallMgr::Stack::thread:** Enter Stack Loop **
21:48:24.703|.\CallMgr.cpp(483)|Trace5|DUM|CallMgr:umThread::thread:** Enter DUM Thread **
21:48:24.750|.\StunClient.cpp(48)|Trace5|STUN|StunClient::loadStunList:STUN server stun.3cx.com has IP:75.101.138.128
21:48:24.750|.\StunClient.cpp(48)|Trace5|STUN|StunClient::loadStunList:STUN server stun2.3cx.com has IP:69.0.208.27
21:48:24.750|.\StunClient.cpp(273)|Trace5||needSTUNtest:Best route: next hop=116.49.224.184 if=262149 on transp: 210.6.133.45
21:48:24.750|.\StunClient.cpp(273)|Trace5||needSTUNtest:Best route: next hop=116.49.224.184 if=262149 on transp: 192.168.0.1
21:48:24.750|.\StunClient.cpp(273)|Trace5||needSTUNtest:Best route: next hop=116.49.224.184 if=262149 on transp: 116.49.224.184
21:48:24.750|.\StunClient.cpp(355)|Log2|STUN|StunClient:nInitTests:[CM506001]: STUN request to resolve SIP external IPort mapping is sent to STUN server 75.101.138.128:3478 over Transport 116.49.224.184:5060
21:48:25.046|.\StunClient.cpp(134)|Log2|STUN|StunClient:rocess:[CM506002]: Resolved SIP external IPort (116.49.224.184:5060) on Transport 116.49.224.184:5060

 

[kirimis]

Try to add your voip provider as generic Sip TrunK and i thing you will not have problem with registration. I had the same problemp with 2 voip providers

 

[macrosoftnova]

Hello there,

Look if your configuration was working before all you need doing is to use the firewall checker and after that restart the program and everything should be ok.

Another thing is to see your VOIP GATEWAY settings if something has been changed from your previous settings, because I notice that VOIP GATEWAY lost it settings in some occasions which is not normal, am using LINKSYS 3102.

Macrosoftnova.