V7 Server Activity log / worse entry´s

[silentfun]

Anyone know what this means? i don´t understant what this mean´s ? Dose the dialcodes try to login as extensions?
it stopped this massive logspam when i stoped the parking orbit service.

21:06:10.296 [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=e86dac6c8866e61a cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

21:06:10.296 [CM502001]: Source info: From: "Unpark line"<sip:*[email protected]:5060>;tag=ca343742; To: "Unpark line"<sip:*[email protected]:5060>

21:06:10.296 [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=e86dac6c8866e61a cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire)

21:06:10.187 [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=464913516f239e46 cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

21:06:10.187 [CM502001]: Source info: From: "Park line"<sip:*[email protected]:5060>;tag=9d03eb72; To: "Park line"<sip:*[email protected]:5060>

21:06:10.187 [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=464913516f239e46 cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire)

21:06:09.859 [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=5642934c8f38761f cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

21:06:09.859 [CM502001]: Source info: From: "Unpark line"<sip:*[email protected]:5060>;tag=dc47a014; To: "Unpark line"<sip:*[email protected]:5060>

21:06:09.859 [CM302002]: Authentication failed due to unidentified source of: SipReq: REGISTER 127.0.0.1:5060 tid=5642934c8f38761f cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire)

21:06:09.750 [CM102001]: Authentication failed for SipReq: REGISTER 127.0.0.1:5060 tid=77514059e1512202 cseq=REGISTER contact=*[email protected]:40000 / 2 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

21:06:09.750 [CM502001]: Source info: From: "Park line"<sip:*[email protected]:5060>;tag=48792b1c; To: "Park line"<sip:*[email protected]:5060>

 

[SY]

It means that your PBX is not properly configured.
Do you have any additional information?

Thanks

 

[silentfun]

this was a fresh install just 1 ext (green) 1 Voipprovider (green).
the wizzard questions was answered.
nothing else configured.

Andy

 

[SY]

this was a fresh install just 1 ext (green) 1 Voipprovider (green).
the wizzard questions was answered.
nothing else configured.

Andy

Andy,

Thanks a lot for the information

 

[William400]

Hi

Thanks for your reply.

Assuming you are using the latest build , can you please go to the Settings > Dial Codes section, Click APPLY and OK and see if the issue persists.

 

[nb]

Can you send us

1) a backup of your PBX settings and
2) The wizard logs from here
C:\Program Files (x86)\3CX PhoneSystem\Bin
3cxwizard.txt

Send them to [email protected] directly (if the backup file is too big you can put somewhere publicly available and I will download it no problem.

Thanks

 

[nb]

OK Guys - there is an easier workaround than taking a backup and restoring it!!

Do the following

Go to Advanced in the management console
Click on the Dial Codes Tab
Change the Parking code to something else example *7 (something that does not exist as a dial code.)
Change the Pickup a Parked Call to something else example *8 (also a unique dial code)
Click Apply and OK.

The Spamming will stop and the new dial codes will register using *7 and *8.

After this go back to the dial codes page and revert *7 and *8 to what they originally were i.e.*0 and *1
Again the previous dial codes (*7 and *8) will unregister and *0 and *1 will register with success.

Let us know on the progress you make on this. Ideally at this point it would be much appreciated if you send me the 3cxwizard.txt file just the same. The backups are not required any more.