Since Fanvil use BusyBox as their embedded OS (Not sure about Yealink).
It should be possible to make a 3CX firmware that periodically sends WoL packets via the ether-wake command to the SBCs MAC address (Should it not get a registration response from its IP address) to start up the SBC assuming it has WoL enabled on its ethernet port.
PS: We always try to enable auto boot from power off on our 3CX SBC machines. However it does not always work specially if someone accidentally shuts down the machine.
It should be possible to make a 3CX firmware that periodically sends WoL packets via the ether-wake command to the SBCs MAC address (Should it not get a registration response from its IP address) to start up the SBC assuming it has WoL enabled on its ethernet port.
PS: We always try to enable auto boot from power off on our 3CX SBC machines. However it does not always work specially if someone accidentally shuts down the machine.
Upvote
0
