ZyXEL P-2000W Won't Register

[rockinthesixstring]

I can't for the life of me figure out how to get my WiFi phone to register.
I have created an Extension (100) with "100" for EVERYTHING (UID, PWD, etc).
I configure it in the phone, and no matter what I do I get "Not Registered" in both the phone and the 3CX GUI.

Does anyone have any suggestions or experience?

Regards
Chase

 

[rockinthesixstring]

no i cannot get the voip client to register either.

 

[rockinthesixstring]

I am using Windows Server 2003 (SBS)
My Firewall is off
the voip client on the server seems to work.

I am using a D-Link DIR-655 Router with the following settings...

 

[rockinthesixstring]

Yes it is a small office network so we are using a basic lan (192.168.0.*)
I can't figure out why my local (server) voip client works but remote does not.

 

[rockinthesixstring]

sorry, my bad. yes LAN but not the server.
it cannot be a firewall on the computer because i shut the firewall off to test.
also, the ultimate goal is to get the ZyXEL phone working and it is on the LAN but not connected to any firewall.

 

[rockinthesixstring]

I am getting close. I can now connect using the 3CX Voip Client... now when I try to make an outgoing call I get...

21:01:33.312 Call::Terminate [CM503008]: Call(4): Call is terminated 
21:01:33.296 Call::RouteFailed [CM503014]: Call(4): Attempt to reach [sip:[email protected]:5060] failed. Reason: Not Found 
21:01:33.296 CallCtrl::onSelectRouteReq [CM503013]: Call(4): No known route to target: [sip:[email protected]:5060] 
21:01:33.281 CallCtrl::onIncomingCall [CM503001]: Call(4): Incoming call from Ext.100 to [sip:[email protected]:5060]

 

[rockinthesixstring]

Yeah

[Name:Rule For CallCentric] [Route 1:CallCentric] [Number Prefix:0]