Search results

  1. What happens when maintenance expires?

    I already know that webmeeting is no more accessible and the fqdn from 3cx will be removed. But will the phone system completely stop working if the fqdn will not be changed to a own one? Of course any remote phones will stop working and it cant be administered over https but what happens with...

  2. Agent login to multiple queues

    hi its possible to make a blf key "Agent login/logout". If one extension is associated to 2 or more queues, will it be logged in or logged out to all of them with just one key press?

  3. Outlook support

    how to connect phone to 3cx client? is this the option "call control" in the management console under phone provisioning/3cx client?

  4. Outlook support

    I saw 3CX supports Outlook and because i am testing currently with free version, i am curious how this looks like. So is it possible from Outlook to go to Contacts and start a call from there? Is it also possible to do this with the hard phone? All contacts are stored in Kerio Connect/Public...

  5. PNP Autoprovision on Yealink T48S

    Is it really so uncommon to have multiple outgoing lines where user can decide which one to use? I put it on second BLF key but it gets overwritten during reboot. If i put it on the end of the provisioned keys at a new position, at least it will survive reboot. But for how long and thats not...

  6. PNP Autoprovision on Yealink T48S

    ok, this was the problem. How do i provision a second account to the phone? it looks a bit limited from what can be pushed to the phone via UI. Will it be overwritten by provisioning if i change line keys locally on the phone?

  7. PNP Autoprovision on Yealink T48S

    i changed all occurrences of old to new ip, did factory reset again, still no change (also server reboot) then i put the full provisioning address directly in the phone i.e. http://192.168.5.15:5000/provisioning/kmko7q56a3p80 (i used http://192.168.5.15:5000/provisioning as DHCP option 66)...

  8. PNP Autoprovision on Yealink T48S

    The provisioning links points to an invalid ip which i think was the old dhcp ipaddress before i changed server to fixed ip. It seems i cannot change it. Prov. method is "LAN". Wanted to save config in extension and got this: d__28.MoveNext() --- End of stack trace from previous location...

  9. PNP Autoprovision on Yealink T48S

    Fw was probably too old (required min 66.81.0.60), now it appears also without TFTP option in phone list with correct MAC address. But when i assign it to an extension for provisioning the phone never gets changed and still shows "new" on extension. Also tried to factory reset the phone. This...

  10. PNP Autoprovision on Yealink T48S

    i used this and it works: http://3cxipaddr:5000/provisioning

  11. PNP Autoprovision on Yealink T48S

    option 66 and ip-address as URL ?

  12. PNP Autoprovision on Yealink T48S

    Hi i tried to autoprovision a Yealink T48S by doing reset to factory but it wont show up in 3CX. The phone says: sending provisioning request and update skipped - everything is in one subnet (LAN) - on the phone PNP is enabled - Firmware 66.81.0.25 - 3CX SIP is running on 5060 UDP and no other...

  13. Evaluating 3cx

    Provider Telekom is listed as supported SIP trunk: https://www.3cx.de/partners/sip-trunks/ but i have no idea if thats just for trunks. Also for the router i need a model which is supported by Telekom and 3CX.

  14. Evaluating 3cx

    Hi currently i am at home testing 3cx with unsupported Fritzbox. So i even found an guide how to setup, but Firewall test is still showing: testing port 5062... full cone test failed On Router 5062 is correctly forwarded according to settings. On Port 5060 i am using Asterisk on a different...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom