ata

  1. SaraMarlar

    Fax ATA

    Not sure what I'm doing wrong. Two separate clients we've tried to setup a fax ATA, and it's failing. 1st scenario: V20 PBX Grandstream HT812 ATA provisioned with a T46U as it's SBC Fax extension registered successfully Xerox printer Outbound faxes fail every time. Calling out on that...
  2. SaraMarlar

    Fax using ATA

    Im having trouble setting up a fax ATA I have a Grandstream HT812 V18 PBX This is a cloud hosted system, and there is a Router phone used as an SBC on site. I have created a Fax Extension 8800, added the HT812 to the FXS/DECT section, then assigned the fax extension to it I've updated the...

  3. Unsupported Temporary FXO for PSTN

    Hi All, I'm new to 3CX and looking for some advice, have recently set up 3CX v18 on a Raspberry Pi, working well with 2 IP handsets. Have worked through the training academy videos for the basic certification (haven't bother with actual certification... well as yet) so covered perhaps the...
    • nbl1268
    • Thread
    • ata fxo grandstream ht813 linksys pstn spa3012
    • Replies: 27
    • Forum: Other
  4. CarlosS

    Solved Grandstream HT802 Configuration - Resets Fix IP and Timezone

    Hi, I have followed this reference document to setup a Grandstream HT802 (GW) which is excellent abd very easy to follow (thanks). Configuring Grandstream HT Series FXS VoIP Gateways I should say upfront, calls can be placed and received through the GW, so it is working fine. However, my...
    • CarlosS
    • Thread
    • ata fxs/dect gateway granstream ht802
    • Replies: 8
    • Forum: Other

  5. ATA HT802 Remote Configuration for Google Cloud Hosted 3cx

    Just wanted to confirm that I should be able to configure a Grandstream HT802 ATA for a client that needs some basic analog phone functionality at one remote site and a fax at another? I've read some conflicting posts but I believe the last word was it is possible and supported? Thanks!
    • systemstech
    • Thread
    • ata fax fxs hosted 3cx
    • Replies: 4
    • Forum: Other
  6. Abdallah

    Unsupported Outbound calls are not working

    Hello everyone, I have a web-hosted 3cx PBX and Grandstream HT813 ATA on premice, I have set up a SIP account for the ATA and inbound calls come in fine. BUT outbound calls are not working, I have tried many forms and types I'm either getting "this number doesn't exist, contact admin, or...
    • Abdallah
    • Thread
    • ata grandstream ht813 outbound calls pstn
    • Replies: 7
    • Forum: Other
  7. akjon RooSho

    Linksys (SIPURA) SPA3000 FXS and FXO Registration

    I know this is silly to ask. But has anyone configured Linksys SPA3000 with 3CX V16! Can anyone help me with the complete procedure? I've tried searching in google and in this forum but was not helpful. I couldn't even resister 3cx extension on it. Any kind of help would be appreciated. Regards
  8. Walter Santos

    Configuring D-Link DVG 5121SP ATA

    Hello, I'm trying to set up my first ATA in 3CX. Does anyone have a step by step setup? Tks

  9. Patton M-ATA-1A and NAT issue

    Hello, Seeking advice here. We have a new customer on a hosted Debian 3CX (3CX and customer are therefore not on the same LAN). Problem is with a Patton ATA which is NATed behind customer firewall. Everything works fine with the desk phones however. Trying for the first time a Patton M-ATA...

  10. GS HT812 - Analogue Fax

    Hi, I wonder if anyone can shed some light... I have an old fax machine that is still needed and i have bought a HT812 which i've been told works with 3cx but, not without some hard work! Does anyone have any ideas other than "its not support" or "fax is dead". The current setup is hosted 3cx...

  11. Autoprovisioning ATAs

    Hello everyone! I would like to know if there is any way to autoprovision ATAs. Is there a list of supported ATAs, ones that I can configure without doing it manualy, device by device on the web page?

  12. Faxes are blank?

    I have an HP Photosmart 7520 connected to a Cisco SPA112 ATA. I have used this thread https://www.3cx.com/community/threads/3cx-and-cisco-spa112.53696/ to configure it. Outgoing fax reaches the destination and the cover page goes through, but the actual scanned document does not. Perhaps there...

  13. Implemented Huge need for larger supported ATA

    We have many cases where clients have a large number of analog phones (hundreds) and using roughly fifty 4port ATAs obviously doesn't work. There needs to be a larger fully supported ATA for these cases. Thank you! Nick

  14. Linksys PAP2 ATA registered but can't make or receive calls

    I have a Linksys PAP2 registered to a cloud 3CX server. I set the following parameters on the web admin page: Under SIP STUN Enable: yes STUN Test Enable: no In LINE 1 Line Enable: yes Nat Mapping Enable: yes NAT keep alive dest: yes Proxy: public ip of cloud 3cx Register: yes Make call...

  15. Supported Fax ATA is nowhere to be found

    I am trying to add a fax ata to my 3cx 15.5 pbx. I see the only supported one is the welltech ata. It seems like that product is no longer manufactured. I cannot find a supplier for it. What are some other options? Has anyone been able to get a Cisco spa112 ATA working?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom