patton

  1. FXO patton sn4141

    Hi, Since the beginning of my installations, I always useded gxw4104 grandstream that work super well, but they are now impossible to find. I ordered a Patton SN4141/8JO8V, but cannot provision to my server. This one has been updated to the latest version 3.22.0-23083. I add in my trunks...
  2. howar

    Patton SN500 with 3CX outbound issue

    Hello! I have configured Patton SN500 with 3CX the inbound calls are working fine and received but the outbound route failed.404 no authentication required configured the trunk prefix 4 then the mobile number strip 1. the pcap from the 3CX side...
    • howar
    • Thread
    • patton
    • Replies: 2
    • Forum: Other

  3. Registration and media issues with overlapping subnets between sites

    Similar to a regular trunk, is it possible to manually set the SIP contact and SDP connection fields for a gateway trunk? In fact, was able to set the SIP contact in the outbound parameters but can’t find where and how to update the SDP connection field for a gateway trunk, ie: Patton...
  4. Kirsty - Fountain IT

    Unable to make calls with Patton SmartNode 4141 FXO PSTN Gateway

    I have installed a Patton SmartNode 4141 4 Port FXO PSTN Gateway and connected up 3 working PSTN lines to the first 3 ports. Patton firmware has been updated to the latest and I have meticulously followed all the instructions on the 3CX webpage to configure and provision this device. After the...

  5. Patton 2 Port FXS: No administrator login in the provisioning file -> no Password set

    The provisioning file for the Patton 2 FXS don't include a administrator login (whle this is done for e.g. the Snom phones) - so they fall back to the default login admin/<empty password>, even if there was a password set before. Using current stable v16.
    • mifritscher
    • Thread
    • password patton security
    • Replies: 5
    • Forum: Other

  6. PSTN E1 PRI Gateway - Patton vs BeroNet

    I am double-minded between beroNet BF16001E1 Box and Patton SN4171/1E30VHP/EUI. Doing a bit of research was able to understand that Patton is robust in CLI which is quite helpful for real-time logging. Would like to know more about personal experiences using both including the cost of each...
    • sysadminmz
    • Thread
    • beronet beronet 16001e1 e1 pri patton patton 4170 pstn gateway tone set
    • Replies: 3
    • Forum: Phone System / PBX

  7. Connect HiPath PBX via SmartNode 4638

    Hello community, I have a problem to connect an old Siemens HiPath PBX via Patton SmartNode 4638 to 3CX. I think my problem is more related to the SmartNode than 3cx. I'm new here, so if this is the wrong forum or channel, feel free to move or delete it. I'm sorry. my Setup - the 3cx...
    • Nevermind83
    • Thread
    • isdn isdn gateway patton smartnode
    • Replies: 5
    • Forum: Other
  8. Andriy

    Patton 4112 FXO behind SBC (no inbound calls.)

    Dear community, I know this is not supported, but several users in this forum reported this as working. I have a landline that i would like to connect to my 3CX (cloud based) via SBC using Patton 4112 FXO. https://www.3cx.com/voip-gateways/patton-smartnode-sn4112/ I have followed this guide...

  9. SN4120/2BIS4V PATTON with ISDN mod from ALBIS tech model SANTIS-ab

    Hello I have installed a 3CX v.15.5 system using the Patton as ISDN gateway. The phone company (OTE) here ins Greece changed my netmod from ELCON to a new one from ALBIS model santis-ab and now the Patton from either digital port of the new netmod does not handle the incoming traffic / calls...
  10. Brad Allison

    Implemented Need new PRI Gateways supported

    The 3CX supported PRI gateways from Patton (SN 4940, 4950, 4960, 4970, 4980, 4990) are deprecated and the new PRI gateways (SN 4170, 4970A) run the Trinity OS. The 3CX website states the Trinity OS is NOT supported. Please make the Trinity OS supported and/or; preferably and; add the...
    • Brad Allison
    • Thread
    • grandstream patton pri trinity
    • Replies: 6
    • Forum: Server

  11. Bogen PA integration

    We have a client that just installed a new Bogen Pa system but did not have an analog card installed in it. Is there a way to integrate this with 3CX with out a Patton or similar device? Thank You
  12. pmterp

    Patton SN34XX Outbound Routing

    Hello, 1) I understand 3CX does not have this functionality built in/support this setup 2) I know others have asked about directing outbound calls to specific lines on a Patton, I believe this is a bit more complex than the previous info provided would help with. I have a client that has POTS...

  13. Patton SN4120 and Fax machine

    Hello everyone, I am testing a deploy of an on-premises 3CX server (Debian). I would like to get rid of an old freepbx system. Everything runs smoothly, the only issue I have is regarding an ISDN line with two numbers. The digital output of the ISDN socket is connected to a Patton SN4120...

  14. Patton M-ATA-1A and NAT issue

    Hello, Seeking advice here. We have a new customer on a hosted Debian 3CX (3CX and customer are therefore not on the same LAN). Problem is with a Patton ATA which is NATed behind customer firewall. Everything works fine with the desk phones however. Trying for the first time a Patton M-ATA...

  15. Patton FXO gateway sound issue

    Hey guys, I have a Patton 4 port FXO Gateway SN My issue is that call quality on it is bad, the sound is muffled, we can barely hear the other person on the other end. Is there something i can check? What would be a good codec setting for this gateway? I used the auto config from 3CX when i...

  16. Patton 4114 echo

    Hey guys, I see this gets brought up quite a bit and have done a lot of searching and reading but haven't seen anyone talk about the issue I am seeing with this Patton. The issue being that for about the first 30 seconds of the call they have an echo. After 30 seconds it goes away and then at...
  17. Andriy

    3CX V15 + Patton 4114 Remote Office

    Sorry, this was discussed before, but there are some points unclear for me https://www.3cx.com/community/threads/3cx-v15-patton-4114-remote-office.47450/ I understand remote installation of Patton Gateway is possible but not supported by 3cx. What I want to know is - 1) should I set this up...

  18. Solved [HELP] - Patton 4552 SmartNode

    Good morning Forum pople, it's my first message here and I really hope I can get some help... I recently got into configuring our company new 3CX instance moving from old Asterisk. I got my Yealink T29G to work pretty good and tried the ECHO (*777) and it works. Now I need to connect it to...

  19. Patton 4112S Busy Signal

    I'm trying to connect our current one-way paging system to 3CX. The paging system is analog and the model is a Valcom 2006a. To help with this I have the Valcom connected to an FXS port on a Patton 4112S, and the 3CX system/network connected to the Patton's Ethernet port. I setup the Patton as...
    • phoneleg
    • Thread
    • 3cx analog busy signal fxs paging patton patton 4112s valcom valcom 2006a
    • Replies: 19
    • Forum: Phone System / PBX

  20. Patton PRI Gateway

    Hello, Have a question regarding the support for Patton PRI gateways. The new models only come on Trinity software and on the supported gateway page, it specifies that the trinity software is not supported. Any one using these gateway without issues? What are the other alternative?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom