patton

  1. Trouble registering a Patton Analog FXO trunk

    My configuration is very basic. I am using 3CX at home. I have a DSL internet connection on a single analog POTS line. I purchased a Patton SmartNode 4528 (4 x FXO, 4 x FXS) to use in conjunction with 3CX. I followed the instructions on adding the SIP trunk for the Patton Analog FXO...
  2. Garnelchen

    Use a Patton Gateway or smth else as a ISDN to SIP Provider device

    Hello there, maybe someone have the same problem - we want to know if its possible, to configure a patton gateway device (or smth else) to use it for a isdn to SIP gateway. So we have a customer which numbers are porting to us. but the current provider accept the porting not until next year...
    • Garnelchen
    • Thread
    • askozia gateway isdn configuration isdn to sip patton provider configuration
    • Replies: 4
    • Forum: Phone System / PBX

  3. Trying to connect a remote Patton fxs to 3CX PBX both on different subnets via VPN

    Hello! I have some trouble to connect a Patton 4114 FXS to may 3CX. The Patton is properly provisioned but don’t show up in the 3CX “phones” section. After a while 3CX blocks the IP of the Patton for “too many failed authentications”. I captured the communication between the Patton and 3CX and...
  4. FirstZero

    Telekom + PSTN Gateway Patton 4120

    HY we are currendly testing 3CX and are using an Patton smart node 4120 for our BRI ISDN line from se Deutsche Telekom. We can get called but we cant make calls. What settings du i have to make to make it running? With greetings FirstZero
  5. Moawia Noor

    Patton Gateway Configuration

    Hi , I need an old configuration file for patton 4 ports FXO gateway . Where every port is configured with different authentication ID and password . I'm trying to find a work around to route inbound calls base on line .

  6. 3CX 15.5 Support for Portech MV374n & Patton Smartnode 4520

    Good Day, May I ask if the newest version of 3CX, ver 15.5, supports Portech MV374n & Patton Smartnode 4520? If it is not supported anymore, will I still be able to use my devices by configuring it to standard SIP? Hope to hear from you soon.
  7. Moawia Noor

    Multiple Patton Gateways

    Hello every one , we have 3cx v 14 system pro , and 3 4 FXO PAtton Gateways , following the recommended from 3CX FAQ we have connected all the 3 to the system , the fisrt one is taking incoming calls , no out , the second one is the taking outgoing calls No in , the third one is just setting...

  8. 3CX v15 + Yealink T4x - Customer Complaining about Call Quality

    Hi Team, We've just rolled out a 3CX v15 for Linux install for a client (16 license, professional), with Patton SN4114/JO trunked to 4x PSTN lines. They are not using VoIP, however they have Yealink T42G, Yealink T46G and Yealink T48G handsets. The customer has advised that their previous NEC...

  9. Patton SN4112 FXO - 503 Service unavailable

    Hello, Just started playing around with 3CX and having a problem trying to get the Patton SN4112 FXO to make outgoing calls. Activity log has an entry stating that Cause: 503 Service Unavailable/INVITE from 192.168.0.71:5060. The Patton has been factory reset and the configuration file...

  10. Solved New Fuction FXS/DECT with Patton FXS GW

    Hi, I need help to configure a patton gateway (SN4112) in front of an analog FAX on a 3cx 15v SP4. How can I use the new function FXS/DECT ? It's possible, after the provisioning, let the patton work outside the PBX lan ? Thanks
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom