sip

  1. 3CX V20 – Incorrect Caller ID on External Call Forwarding (Generic SIP Trunk)

    Hello everyone, We're experiencing a Caller ID issue with our 3CX PBX and would like to know if anyone in the community has encountered a similar problem or found a reliable solution. Our environment: 3CX Version: Latest stable V20 release Operating System: Debian SIP Trunk: Generic SIP...
  2. SIP Call ID value

    Can the SIP Call ID from the SIP invite be made available so it can be used by the application? The use case is being able to tell a third-party capture service for sensitive data to intercept the correct active 3CX phone call. I see no way to currently enable the removal of sensitive data...
  3. "also ring my mobile" option timeout

    Hello, We previously experienced an issue with call forwarding where the callee’s number was displayed instead of the caller ID. We have resolved this by enabling the "also ring my mobile" option, which now correctly displays the caller's number. However, we would like to know if it is...
  4. PBX 200 Ok not sending

    We have installed a 3CX v20 ok digital ocean about 10 months ago. We used a SIP provider for external calling since then too. Our SIP trunk worked great for the last 10 months until today when our trunk shows unregistered for hours then registered for a few minutes before going unregistered...
  5. 3CX SBC - Set DSCP with nftables

    I noticed in the v20 Update 7 release notes that it says, "marked RTP traffic as high priority (TOS 46) ". When I upgraded to v20 about a year ago, I was surprised that the latest SBC software doesn't set industry standard QoS markings. I got to work in nftables to mark packets with correct...
  6. ronenba

    outgoing calls stopped working

    I am using 3cx on the cloud Version 20.0 Update 7 (Build 1019 Beta), something started last Friday, cannot make outgoing calls 1. sip provider VoIP.ms 2. i have a few PBX with the same provider all working fine 3. i can receive incoming calls to the 3cx 4. outgoing calls ring once, then on the...
  7. SIP Trunk to Cisco, names are not displayed

    Hello everyone, We have configured a SIP trunk between 3CX and Cisco Call Manager. All works fine except that the names are not displayed on Cisco phones when call is initiated from 3CX Is there any way to make it send the names
  8. Configure 3CX with RingCentral

    Here is the Ringcentral SIP: SIP Domain sip.ringcentral.com:5060 Remote SIP port 5060 Local SIP port 5060 Outbound Proxy Please select outbound proxy according to the location of your device Outbound Proxy Port 5090 User Name 1XXXXXX5...
  9. Univ. of North Florida

    DID and Caller ID Errors After Upgrade to V20 Update 5

    Hi, We are with the University of North Florida’s Telecom Team and we have found a couple of issues that appeared after we performed an update to V20 Update 5 Build 20.0.5.551. Issue 1: We are no longer able to have more than 100 entries in our “Reformat incoming or outgoing caller ID”...
  10. Gamma Trunk Not Registering

    I'm having trouble registering a gamma trunk. I've tried the same trunk directly on a yealink phone and it registers fine with incoming and outgoing calls working. On 3CX I've tried adding it using the gamma template where i get a 404 error. I've also tried adding it as a generic trunk but get...
  11. Sophos Firewall, AT&T On-prem SIP, and 3CX VM

    Good afternoon everyone! Does anyone have any good tips or pointers using a Sophos firewall and setting up 3CX as a VM? We have AT&T on-prem SIP for voice services. The thought is to set a port on the firewall to the AT&T SIP static and then set up a DNAT to point that traffic to the 3CX VM host...
  12. 3CX RTP Firewall 'Other' Ports

    Afternoon All, I have a 3CX (V20) install on a different subnet (10.251.11.2) to the IP phones (10.241.11.0/24). I have opened ports 9000-10999 and 5060-5063 between the IP Phones and the PBX and two way audio is working fine. When I attempt to use the *777 echo test, I have noticed that the...
  13. ronenba

    V20 issue with changing sip trunk + Voip.ms

    started to have metal quality calls: 1. run updates to the PBX 2. restart the PBX 3. router on the customer network 4. test the internet speed 5. change on voip.ms the server address for the sip, when changing on 3cx getting busy for incoming calls, and any other server from the one we set up...
  14. v20 Weird issue with mobile app (PBX delivers audio is workaround)

    Hello, we upgraded to v20 and have a strange issue lately. I'm not sure if it started with the latest update to Update 2 (Build 715) or if it was there on the initial v20 build. Outgoing calls to any external number via our SIP trunk originating from the 3cx mobile app (both Apple and Android...
  15. jimbo59

    Solved Changing IPs

    I had to change a block of IP addresses and it should have gone smoothly but I ran into the strangest problem. I switched the addresses from Comcast, modified the router/firewall, and told Flowroute where to trust me. Picked up the phone and was able to call myself Friday night. Monday morning...
  16. Telnyx IP changes

    we received an email that Telnyx is changing a SIP ip range. with 3cx hosted was this change taken care of or is it something we need to be concerned with ? i know we can't make network changes on hosted by 3cx right?
  17. krossh

    V20 3CX Not Responding to 183 Session Progress

    We recently upgraded some of our versions to V20 as the deadline is coming around next month. Has anyone else had any issues with 183 early media? Extension Dials (XXX) XXX-XXXX as 10 digit, This being a LD call should be dialed as 11. ---------V20---------- -Send SIP 183 Session Progress to...
  18. DatawiseSolutions

    Solved Calls don't connect unless number is in contacts.

    When I use the soft phone to call my cell it doesn't ring unless the DID from 3CX is in my cell contacts. It will go straight to voicemail on my cell. If the DID is in my cell contacts then the call goes through. It actually shows as incoming on my cell. Also it takes a while to connect. It...
  19. Limiting Public Access to on-prem Server?

    On-Prem server with a NAT'd IP, is there a list of public IP's we can limit access into 3CX by chance? We are seeing quite a few SIPVicious intrusions and was wondering if possible to limit access into the 3CX IP on-prem would help? Thanks
  20. DatawiseSolutions

    Skyetel 3CX Free Edition

    Any idea why Skyetel isn't supported by 3CX Free and SMB? Is there a way to configure Skyetel manually so it will work?