t46g

  1. IP Phones are registering to 3CX on Lightsail with Class C, Internal IP 192.168.x.x

    We are facing this intermittant issue that the IP phones register to our 3CX systems hosted on lightsaail with an internal IP. 192.168.x.x or 10.x.x.x. However some phones can register propertly with the public IP. The ones with Public IP we can provision remotely and also send firmware...

  2. Solved Yealink T46G "MAKE CALL" from Windows CTI Client over SBC

    On our T46G phone that is located in a remote office, it is connected with a SBC. If we use the Windows CTI client to dial, it will ring the phone with "MAKE CALL" and will then only make the call when accepted. As this is a supported phone, the CTI client should just dial the phone if I am not...

  3. T40P & T46G Park bug

    Hi, I got the following issue I upgraded 5 Yealink T40P's and 1 Yealink T46G to its latest firmware for 3cx (**.83.0.55) Now, every 15 minutes the park beep plays, the sound that plays when you have someone on hold It was directly after the update and i am unable to find anything within the...
  4. Michael Menor

    Calls are not working over Bridge (Grandstream to Yealink)

    A Grandstream phone is not able to dial a Yealink phone over the Bridge, however the Yealink phone is able to contact the Grandstream phone. I've tried switching the Master and Slave role between the two 3CX systems, but that didn't make a difference. Background info on the setup: 3CX...

  5. Solved Unable to add BLF for T46G with sidecar

    Guys, I am trying to add more speed dial buttons to a phone system that we recently took over using T46G phones. Doesn't matter what type of button I am trying to add this is the error I am getting: d__12.MoveNext() --- End of stack trace from previous location where exception was thrown ---...

  6. Solved Yealink T46 power light indicator

    Version 15.5 running supported firmware and stock 3cx template. The issue is that the power led blinks regardless of the setting under the phone provisioning tab. I have it set to voicemail only, and confirmed the ext does not have a waiting voicemail. The led indicator acts as expected until...

  7. Solved V15 Yealink T46G provisioning

    Hi, very new to this so please excuse my ignorance :( We are trying to configure T46G with 3CX latest V15.5. I'm afraid we do not really understand the concept. I can find a provisioning url anywhere to place in option 66. The manual says go to settings -> phone provisioning but this link simply...

  8. Download updated Templates but don't push - option?

    Does anyone know if there's a way to download updated templates but NOT to push them - similar to the way that firmware works? We run our phones on a different VLAN than default, the default templates don't reflect that, and (3CX please pay attention to this...) there is no variable for VLAN in...

  9. MWI Light Still Flashing on T46G, but nobody is home.

    Hello all, Now before the natives get restless, let me say I managed to find some posts here in the forums directing me to modify the template yeahlinkT46T48.ph.xml and set parameter account.1.subscribe_mwi_expires to 3600 (the default value was 86400. I did this. I re-provisioned the...
  10. Paul Omans

    Blinking Light for missed calls on Yealink T46G

    I use Yealink T46G phones with all of my 20+ clients, well over 300 phones in total. With the newest firmware and template update from 3CX, it defaults to having the red notification LED blink when there is a missed call. I have heard from 16 tenants now that every single one of them strongly...
    • Paul Omans
    • Thread
    • led notificaition t46g yealink
    • Replies: 13
    • Forum: Server
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom