trunks

  1. jimbo59

    Solved Changing IPs

    I had to change a block of IP addresses and it should have gone smoothly but I ran into the strangest problem. I switched the addresses from Comcast, modified the router/firewall, and told Flowroute where to trust me. Picked up the phone and was able to call myself Friday night. Monday morning...
    • jimbo59
    • Thread
    • changed ip address firewall flowroute sip trunks
    • Replies: 3
    • Forum: Other

  2. Trunks issue in V20

    Hello everyone, I upgraded from V18 to V20. I used trunks that were not "validated" by 3CX in the V18 and everything worked perfectly. Following the update, I found the trunks but the behavior is erratic. For some I had errors in the "unreachable" logs with DNS errors" while the destination...

  3. Drop NON Numeric Calls

    Hi, I doubt I'm the only one with these issues buy can't find any advice, so, say I go to call "Fred" I type Fred in search bar in the client and hit enter. the dialer assume I want to dial "Fred" my catch all sip trunk drops the call as "Fred" is not a real number is there a way/outbound...
  4. MBergeron

    Sip provider say 500+ calls from pbx in seconds

    I can't see those calls in cdr, how this is possible?
    • MBergeron
    • Thread
    • blacklist provider sip trunks
    • Replies: 1
    • Forum: US

  5. Sip Trunk DID setup

    Hi all. I have a sip trunk with DID numbers 3000-3099 and the carrier sends 4 digits. My extensions are also 4 digits in length and they are numbers 3000-3099. The trunk also has a main number 5743321. I am lost on the configuration. Please assist. Do I do the following steps and it works? 1...
    • Gurei123
    • Thread
    • ddi did inbound incoming sip trunks
    • Replies: 5
    • Forum: Other

  6. Solved Error 12294 ID500

    Good afternoon everyone Recently I installed a PBX 3CX to one of my clients, I find that from time to time it shows me errors in the calls and an occasional delay of up to 10 seconds for a call to be made or entered. It shows me the following errors: SIP Server / Call Manager ID: 12294 Call or...

  7. Forwarding Rules Issue - Multiple Trunks

    We are having a forwarding rule issue with multiple trunks, and I wondered if anyone had ever encountered this before. Scenario: Extensions 0001 - 0005 are on Trunk 1 and Extension 0006 is on Trunk 2 Extension 0001 has a lunch forwarding rule where it rings for a second and then forwards to an...

  8. unique trunks authentication id

    Why two trunks can't have same authentication id?

  9. Comcast SIP trunks - anyone using?

    Good morning, I have a client thinking of moving to Comcast SIP trunks, and wanted to make sure there would be no issues connecting this to 3CX - I cannot think of a reason it would be a problem, but wanted to cover my bases. Thanks, Jeff
  10. johnpi

    CenturyLink is now Level3 - 3CX SIP Trunk doc for CL still applicable

    Ref: https://www.3cx.com/docs/centurylink-business-sip-trunk/ I received some Pre-installation info from Level3/CenturyLink regarding setting up a new SIP trunk service. They have some "Key Considerations" for configuring the service and I wanted to make sure what I'm reading from 3CX is still...

  11. SIP Trunks that Allow outgoing caller Id to be set via API

    The title is pretty much self expenatory. Du you know any trunks that allow you to spoof your number with your software without having to /imput, register, verify/ the number in their platform?

  12. Call Recording for trunks

    I would like to suggest the addition of the ability to record incoming and outgoing trunk calls even when no extension is envolved. for example when a call is coming from a bridge and is routed directly to a sip trunk or else. or when you dial from an outside number and use vm dialout feature to...
    • Artin Davidian
    • Thread
    • call recording recording recordings trunk recording trunks vm dialout
    • Replies: 2
    • Forum: Server
  13. the60

    Implemented Outbound Caller ID override in outbound rules

    Please consider adding a field to the outbound rules that allows the ability to override the default outbound caller ID based on an entry in the outbound rules. Currently, if a company wants to set up multiple entities on a 3CX box, we need to set up a separate trunk for each entity, and then...
    • the60
    • Thread
    • caller id outbound rules override trunks
    • Replies: 4
    • Forum: Server

  14. Trunk configuration multiples IPs for signalling

    Hi All. What is the best practice in 3CX v15 for setting up a for example a single DID but with a termination provider that signals on multiple IPs? I am guessing this is most of them but mine in particular signals origination and termination across 3-4 IPs each, primary and backup. I've had...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom