3CX phone systems with PHP

[frobak]

Is it possible to integrate 3cX systems with a PHP applications

Specifically, when the phone rings, i need to grab the caller id/number, get that into PHP, and then process it within the application.

Is there any documentation on this sort of thing?

Do you even think this is possible?

Thanks

 

[jasit]

check if your phones have action url, when you say get into php, I am assuming you need to send something to a webserver.

the yealink phones do, just not sure about yours.
jasit

 

[frobak]

Hi Yes, the phones are Yealink T46GN, is there any documentation, tutorials that you're aware of?

 

[craigreilly]

I found it was easier with the 3cx Phone for Windows to launch an external application when the phone rang.
I could not find a way to get the inbound caller id on the device.

 

[jasit]

K, a quick google and a quick test,

here is some of the settings.

so on the phone, under Action URL Incoming Call
http://ipaddress of webserver/somefile.php?device=$mac&local=$local&remote=$remote&displayremote=$display_remote



then make a phone call to that extension, and after you hang up go check the log files on the webserver, you should see the following

2014-12-03 22:11:57 192.168.0.99 GET /somefile.php device=00:15:65:3e:5a:de&local=sip:2254%40192.168.0.90&remote=sip:2045551212%40192.168.0.90&displayremote=2045551212 80 - 192.168.0.199 Yealink+SIP-T38G++38.70.1.26+00:15:65:3e:5a - 404 0 2 0



I found this http://www.sustworks.com/pa_guide/genericNotification.html

 

[frobak]

Brilliant, thanks for your help. I'll be testing this over the next few days so will report how I get on.

Thanks