3CX services occasionally needs to be restarted

[denn]

Hi,

Every week or two I need to restart all the services in order to be able to make calls.

I can see from the activity log that 3CX attempts to make the call, but the call never gets in.

07-sep-2015 08:59:34.608   Leg L:2557.1[Extn] is terminated: Cause: CANCEL from 192.168.1.217:5075
07-sep-2015 08:59:23.145   Currently active calls - 1: [2557]
07-sep-2015 08:59:06.951   [CM503025]: Call(C:2557): Calling T:Line:10009>>28763546@[Dev:sip:[email protected]:5060] for L:2557.1[Extn]
07-sep-2015 08:59:06.894   [CM503027]: Call(C:2557): From: Extn:331 ("Denni Pultz Gottfredsen" <sip:[email protected]:5060>)  to  T:Line:10009>>28763546@[Dev:sip:[email protected]:5060]
07-sep-2015 08:59:06.894   [CM503004]: Call(C:2557): Route 1: from L:2557.1[Extn] to T:Line:10009>>28763546@[Dev:sip:[email protected]:5060]
07-sep-2015 08:59:06.894   Line limit check: Current # of calls for line Lc:10009(@VIPTEL (82130330)[<sip:[email protected]:5060>]) is 0; limit is 30
07-sep-2015 08:59:06.894   Call(C:2557): Call from Extn:331 to 28763546 matches outbound rule '82130330'
07-sep-2015 08:59:06.893   [CM503001]: Call(C:2557): Incoming call from Extn:331 to <sip:[email protected]:5060>
07-sep-2015 08:59:06.893   NAT/ALG check:L:2557.1[Extn] REQUEST 'INVITE' - basic check passed. No information for extended checks

Restarting the services helps, but it is really a pain. Does anyone have a clue?

 

[Saqqara]

What version of 3CX,

Have you excluded 3CX folders from anti virus programs

C:\Program Files\3CX PhoneSystem\* 
C:\ProgramData\3CX\* 

 

[denn]

Hi Saqqare,

V. 14 but the issue was also on v12.

Yes I can excluded those folders.

 

[leejor]

If the hardware is the same as when you were running the previous version, then that would be my first suspect, that, or some other programme running at the same time.

You could try stopping all other unnecessary background programmes.

Run a memory test programme, could be bad memory causing it to hang.

Install again, on another PC/server, apply the back-up from current system, but only use the Demo licence. Let the system run and try some test calls, over a period of time. If it doesn't require a re-start to continue functioning, then consider moving the exiting system to a new PC/server unless you can narrow down what is causing the system to stop.