3CX V15.5, Update 3 ALPHA is Available for You to Try Out

[nb]

Bored during the holidays? Not to worry, we\'re releasing SP3 just in time for you to have ample time to test it out and provide us with your feedback. We\'ve included IPV6 support, conference setup improvements for the web client, auto-enabled SSL and TLS and we\'ve also added a hosting-admin account level. What else:

• IPV6 support (dual ...

• Continue reading the Original Blog Post.

 

[StefanW]

Good timing - my wife thinks it's the best present I could get as this will keep me out of her way for a few hours.

Many thanks for all the efforts and improvements this year from the 3CX team - have a good rest over the festive period.

Will report back.

to you also! See you again in 2018.

 

[N_G]

@comms1 Thank you and merry Xmas to you too!

 

[DSXVOICE]

"We’ve included IPV6 support, conference setup improvements for the web client, auto-enabled SSL and TLS and we’ve also added a hosting-admin account level."

@santa! Just what I wanted for xmas!
#MerryXmasTo3CX

 

[RafaelD]

Great update Nicky!
can you tell me how i can acces the hosting-admin account level?

 

[the60]

Good stuff!!

 

[jimbo59]

Did you fix the recording issue?

Can we change the queue ringtones without custom template?

Getting this error installing on clean Debian.

 

[andreaschr]

Did you fix the recording issue?

Can we change the queue ringtones without custom template?

Getting this error installing on clean Debian.

Hi

Probably you miss the first command of the blog

wget -O- http://downloads.3cx.com/downloads/3cxpbx/public.key | apt-key add -

or wget is not installed on your system, run this to install it

apt install wget

then try again

Merry Christmas

 

[jimbo59]

Please read original screen shot and see that if wget wasn't installed I wouldn't have gotten that far. I did the correct commands and have wget installed.

 

[accentlogic]

Jimbo - check your available disk space to make sure there is enough. Odd things happen if there is not enough free space, and the errors do not always indicate this.

After that, check 3cxpbx.list file. I had to remove the quotes to get it to run update properly.

sudo nano /etc/apt/sources.list.d/3cxpbx.list

Look for "deb http://downloads.3cx.com/downloads/debian stretch main" and remove the double quotes and remove them if they exist. Then Ctrl+X to exit, yes to save.

Then, run apt-get update again, followed by apt-get install 3cxpbx

 

[jimbo59]

Thanks. I went ahead and ran the windows package for now. Works great. Have a nice bridge setup with sp2 (linux) and sp3 (windows).
Love the return of conference.

 

[mtech1]

Have you got fanvil hot desking in this release?

 

[jimbo59]

It's in the drop down list.

No custom templates for hotdesk though.

 

[nb]

Great update Nicky!
can you tell me how i can acces the hosting-admin account level?

We will release a blog post for this - yes you are right..
It is made via setup xml.. We will do this too. I can upload a sample template here. Send me a pm.

 

[nb]

Did you fix the recording issue?

Can we change the queue ringtones without custom template?

Getting this error installing on clean Debian.

Queue ring tones is planned for SP4 !!

 

[nb]

Have you got fanvil hot desking in this release?

In the final version it will be for sure. Now we have a firmware that does not reboot making Fanvil phones faster to login to hotdesking.

 

[cobaltit]

Would love to see multicast paging configurable on the phone provisioning page. Still using custom templates for this as well.

 

[nb]

Would love to see multicast paging configurable on the phone provisioning page. Still using custom templates for this as well.

Even this we gonna make.. V easy.. SP4 both of them together.

 

[cobaltit]

Even this we gonna make.. V easy.. SP4 both of them together.

Great news. I'm not sure on how you think best to implement but keep in mind scenarios using Cyberdata to do the multicast vs coming directly from 3CX so the field needs to be configurable in some way to achieve that.

 

[poynter.net]

Have you got more information on the TLS setup? Does this use the LetsEncrypt certificate? Do the phones need to connect via xxx.3cx.xxx rather than the internal IP address?

Also to enable SRTP is this only done on the phone interface or can the provisioning template be adjusted.

Will there be any status displayed on the management console for the phones and SIP Trunks?