Auto Provisioning STUN/ Server RPS Yealink don't see Username/pass

[VNG2332]

Hello all,
I need to support Auto Provisioning related issues, I have configured MAC IP Phone on server 3cx, The system says "RPS request delivered successfully". I have restarted the IP Phone but am not required to log in with the user and password.
I use IP Phone yealink.

I tried it on the local network successfully, but it didn't work remotely.

 

[cobaltit]

RPS will only work for factory reset phones. Simply restarting them won't do it.

 

[VNG2332]

RPS will only work for factory reset phones. Simply restarting them won't do it.

I have restored the factory settings

 

[cobaltit]

Well if you factory reset the phone and it's not picking RPS then there's a couple other things that could be going on:

http://support.yealink.com/faq/faqInfo?id=185

 

[VNG2332]

Well if you factory reset the phone and it's not picking RPS then there's a couple other things that could be going on:

http://support.yealink.com/faq/faqInfo?id=185

Thank you,

because vlan granted to IP Phone does not allow internet access, just open to enable internet access, RPS is working.

 

[cobaltit]

Nice, glad you were able to resolve it.

 

[VNG2332]

Hi Cobaltit, I have setup 3cx server 16 Sim call. How much bandwidth do I want for QoS for 3CX 32 SIM CALL?

 

[JohnS_3CX]

You might find this article useful, it will depend on the codecs you use so you can make a calculation based on that: https://www.3cx.com/blog/docs/bandwidth-utilised-for-voip/