Solved bridged pbx presence

[jakthree]

3CX 15.5.56602.6 standard annual
I have setup a bridge between two 3CX PBX at site-1 (master) and site-2 (slave) using tunnel port 5090. The bridge shows connected (green dot). Site-1 extensions are four digit 1xxx. Site-2 are four digit 2xxx. Outbound rules are in place and I can intercom between sites.
During bridge setup, site-1 and site-2 bridge presence is set 'publish - DEFAULT group'.


I understand that receiving presence of 'selected extensions' is part of PRO license.

At 23:30 in the web tutorial is said 'each remote system which is bridged to the local pbx will be shown in the presence screens of the 3cx client and web client'.
The Site-1 windows web client does not show Site-2 presence tab.
The Site-2 windows web client does not show Site-1 presence tab.

Does this mean that web client remote presence tab is only shown in the PRO version?
Thank you,

 

[cobaltit]

It means remote presence via ANY client is only available in PRO

https://www.3cx.com/ordering/pricing/

 

[leejor]

Everything i come across suggests that you require a Pro licence, at both ends, for this to work.

https://www.3cx.com/community/threads/bridge-and-remote-presence.47642/

 

[jakthree]

I understand better now.
Thank you for your quick answers.

 

[cobaltit]

You only need PRO to see remote presence. If you have PRO on one and and STD on the other PRO can see the presence on STD but not the other way around.

 

[murat demirtas]

@cobaltit I agree

 

[jakthree]

That answers my question.
Thank you