Bridges - 3CX Pro, Version 16.0.3.525

[MH-Nottingham]

Hi

Running 3CX Pro, Version 16.0.910. I can see bridges on this install. Just done a fresh install for another site 3CX Pro, Version 16.0.3.525 and I cannot see "Bridges" on this install. Everything else seems fine.

3CX Pro, Version 16.0.910


3CX Pro, Version 16.0.3.525


What had happened to the bridges option under advance? Need this back.

 

[Evolute IT]

Hi

Running 3CX Pro, Version 16.0.910. I can see bridges on this install. Just done a fresh install for another site 3CX Pro, Version 16.0.3.525 and I cannot see "Bridges" on this install. Everything else seems fine.

3CX Pro, Version 16.0.910
View attachment 11911

3CX Pro, Version 16.0.3.525
View attachment 11910

What had happened to the bridges option under advance? Need this back.

In v16 SP3, the bridges have been relocated in SIP Trunks where you find also SBC and Gateway.

 

[Saqqara]

Ver 16.0.3.525 is in Alpha and ideally should not be used in a live environment -
https://www.3cx.com/blog/releases/update-3-alpha/

In this version , bridges have been moved to under SIP Trunks.

 

[MH-Nottingham]

Can you roll the update back? If so, what are the steps?

 

[cobaltit]

No roll back. Either live with it and hope you can upgrade from alpha to beta to final or export (not backup) your settings and do a fresh install on SP2 and import.

You could try to take a backup and restore under SP2 but that isn't supported.