Can't Make Calls with LinkSys 3202

[bblokey]

I am having issues making outbound calls. My incoming is working fine and my setup includes a psp2 for my analog line. I have the phone line port going to my gateway line port.

Looks like maybe my gateway is not setup correctly. What do you think?

Time Function Message
23:10:35.032 Call::Terminate [CM503008]: Call(4): Call is terminated
23:10:35.016 Call::RouteFailed [CM503014]: Call(4): Attempt to reach [sip:[email protected]:5060] failed. Reason: Not Found
23:10:35.016 CallLeg:nFailure [CM503003]: Call(4): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:192.168.0.100:5060

23:10:34.922 CallCtrl:nSelectRouteReq [CM503004]: Call(4): Calling: PSTNline:10000@[Dev:sip:[email protected]:5060]

23:10:34.907 CallCtrl:nIncomingCall [CM503001]: Call(4): Incoming call from Ext.501 to [sip:[email protected]:5060]

 

[bblokey]

NM... I found my problem and I am able to make external calls...

 

[ktornqvist]

what was the prob ?

 

[bblokey]

On my gateway I had line 1 and my pstn line using the same port. Which caused the system to try and route my outbound call to line 1 which it could not resolve.

 

[arpa]

On my gateway I had line 1 and my pstn line using the same port. Which caused the system to try and route my outbound call to line 1 which it could not resolve.

You must not use the same port for the Line 1 and PST Line. That's why you have the problem. In the 3CX Forums i found the solution. Here is the link
http://www.3cx.com/forums/spa-3102-outgoing-2061-15.html
You must use SIP port 5061 for the Line 1 and 5060 for the PSTN