Solved DID routing not working - PBX Free

[Aidaca]

I am using VoiceMeUp as my SIP. I have 2 DIDs but all calls route to the default IRV. I have seen threads about the DID not being identified properly. Unfortunately the call log doesn't provide enough info for me to see what the actual DID is that's being passed.

Could be something else but I'm guessing it has something to do with the DID label I'm using.

Appreciate any help

 

[leejor]

Have a read through this...

https://www.3cx.com/docs/manual/inbound-did-call-routing/

There is a troubleshooting section at the end, with information on identifying the DID number being sent in the log. It may be that your provider isn't sending DID information. Did you specify that requirement when you applied for the service, or, are you just assuming that it is being sent?

 

[Aidaca]

Appreciate the quick response. Using the log I was able to see the DID being passed. Corrected my SIP Trunk with the DIDs being passed and all is good.

 

[YiannisH_3CX]

Glad the issue has been resolved and thank you for updating the thread with your solution