Digital receptionist with SPA3102

[leejor]

Sorry, I thought the question was, to the effect, "how do I access my voicemail from an extension other than my own".

Of course, if it is from her own extension, then just dial the 222 and follow the instructions.

 

[twilight3]

New to 3cx as well and setting up my first test system with a linksys/cisco spa3102 and I follow online document and unit registers but when calling in the line is not answered by attendant and when calling out get no dial tone. On inbound the state doesnt not change at all in the port status when dialing out I connect and says out but no call progress or dialtone.... line tests fine on its own. Reset spa3102 to factory default and followed instructions again. What am I missing here?

Thanks

 

[twilight3]

 

[twilight3]

tried it with and without the*

 

[leejor]

First of all, please don't hijack someone else's thread, start your own. Just because it is the same device doesn't mean the issues you are facing are the same as someone else.

The 3102 setting you posted look OK. What does the 3CX log show? What device are you using to place the test call from 3CX, the FXS port on the 3102 ?

Can you please post a log showing an inbound call attempt (PSTN to 3CX), and an outbound call attempt.

 

[twilight3]

Thanks, figured it out.