- Joined
- Jan 23, 2007
- Messages
- 21
- Reaction score
- 0
I did get both inbound and outbound calls to work correctly with BroadVoice. But I'm having problems when I use a digital receptionist. Every time I use one it will answer the call for me but then hangs up 10-15 seconds later. This is not due to the timeout feature. At least I don't think so. I've change the timeout to 30 seconds and also specified the ring group to go to if no action is taken. But after 10-15 seconds it will just disconnect my call. If I do press 1 or 2 it will ring me to the ring group but still disconnect after 10-15 seconds (10-15 seconds after digital receptionist picks up). I've pasted my server log below as well. Does anyone have any suggestions??
13:23:20.296 StratLink:
nHangUp Call(C:26): got Hang-Up from Ln:10001@Broadvoice2; reason: BYE
13:23:14.906 CallLegImpl:
nConnected Established media channel for Ext.101: remote=192.168.2.4:5004; local=192.168.2.6:7030
13:23:14.906 StratInOut:
nConnected Call from Ln:10001@Broadvoice2 to Ext.101 is established
13:23:08.234 ??: from 'PhoneServer:0/MediaServer'
TMF detection off on EP:0000005D@
13:23:03.625 CallLegImpl:
nConnected Established media channel for Ln:10001@Broadvoice2: remote=147.135.20.248:10164; local=67.53.129.195:9000
13:23:03.609 CallConf:
nIncoming Incoming call from Ln:10001@Broadvoice2 to sip:[email protected]
13:23:20.296 StratLink:
13:23:14.906 CallLegImpl:
13:23:14.906 StratInOut:
13:23:08.234 ??: from 'PhoneServer:0/MediaServer'
13:23:03.625 CallLegImpl:
13:23:03.609 CallConf: