forwarding to my mobile??

[tpinnovations]

I am not familiar with calling systems outside the USA, But the configuration looks ok to me.

However one thing bugs me in that log is this;

unable-no-sdp, no-recvonly

 

[aftermarket]

i thought i had it right. i wonder why its not calling out its so annoying especially as i'm wanting to buy the full version however i'm not going to if i cant get something as simple as this working

 

[bduke08021]

i had to remove the 9 to dial out, the ext that the outbound rule will allow, then my forwarding worked. So, my outbound rule can be dialed from any ext, without dialing a code like 9 and it works.

 

[aftermarket]

mine still doesnt work even if i try that. could this be something to do with the ports failing? as can be seen below. what are the stun servers used for also it seems some other ports are being blocked too


10:48:17.157 [CM504001]: Ext.104: new contact is registered. Contact(s): [sip:[email protected]:5060;transport=udp/104]

10:48:15.346 [CM504001]: Ext.100: new contact is registered. Contact(s): [sip:[email protected]:5060;transport=udp/100]

10:48:13.001 [CM504001]: Ext.102: new contact is registered. Contact(s): [sip:[email protected]:5060;transport=udp/102]

10:48:08.131 [CM504001]: Ext.107: new contact is registered. Contact(s): [sip:[email protected]:5060;transport=udp/107]

10:47:51.578 [CM504001]: Ext.106: new contact is registered. Contact(s): [sip:[email protected]:5060;transport=udp/106]

10:47:44.486 [CM505001]: Ext.103: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] Transport: [sip:192.168.1.105:5060]

10:47:44.486 [CM503002]: Call(78): Alerting sip:[email protected]:5060;transport=udp

10:47:44.478 [CM505001]: Ext.100: Device info: Device Identified: [Man: Cisco;Mod: 7940;Rev: General] Capabilities:[reinvite, replaces, unable-no-sdp, no-recvonly] UserAgent: [Cisco-CP7940G/8.0] Transport: [sip:192.168.1.105:5060]

10:47:44.477 [CM503002]: Call(78): Alerting sip:[email protected]:5060;transport=udp

10:47:44.467 [CM505001]: Ext.101: Device info: Device Identified: [Man: Cisco;Mod: 7940;Rev: General] Capabilities:[reinvite, replaces, unable-no-sdp, no-recvonly] UserAgent: [Cisco-CP7940G/8.0] Transport: [sip:192.168.1.105:5060]

10:47:44.467 [CM503002]: Call(78): Alerting sip:[email protected]:5060;transport=udp

10:47:44.463 [CM505001]: Ext.104: Device info: Device Identified: [Man: Cisco;Mod: 7940;Rev: General] Capabilities:[reinvite, replaces, unable-no-sdp, no-recvonly] UserAgent: [Cisco-CP7940G/8.0] Transport: [sip:192.168.1.105:5060]

10:47:44.463 [CM503002]: Call(78): Alerting sip:[email protected]:5060;transport=udp

10:47:44.374 [CM503003]: Call(78): Call to sip:[email protected] has failed; Cause: 302 Moved Temporarily; from IP:192.168.1.109:50339

10:47:44.373 [CM503014]: Call(78): No known route to target: Ext.120

10:47:44.373 [CM503014]: Call(78): No known route to target: Ext:Ext.120

10:47:44.372 [CM503006]: Call(78): Diverted to: <sip:[email protected]:5060>

10:47:44.147 [CM503024]: Call(78): Calling RingAll800:100Ext.100120101Ext.101102Ext.102103Ext.103104Ext.104105Ext.105@[Dev:sip:[email protected]:5060;transport=udp]

10:47:44.141 [CM503024]: Call(78): Calling RingAll800:100Ext.100120101Ext.101102Ext.102103Ext.103104Ext.104105Ext.105@[Dev:sip:[email protected]:5060;transport=udp]

10:47:44.135 [CM503024]: Call(78): Calling RingAll800:100Ext.100120101Ext.101102Ext.102103Ext.103104Ext.104105Ext.105@[Dev:sip:[email protected]:5060;transport=udp]

10:47:44.129 [CM503024]: Call(78): Calling RingAll800:100Ext.100120101Ext.101102Ext.102103Ext.103104Ext.104105Ext.105@[Dev:sip:[email protected]:5060;transport=udp]

10:47:44.124 [CM503024]: Call(78): Calling RingAll800:100Ext.100120101Ext.101102Ext.102103Ext.103104Ext.104105Ext.105@[Dev:sip:[email protected]:5060;transport=udp]

10:47:44.117 [CM503004]: Call(78): Route 1: RingAll800:100Ext.100120101Ext.101102Ext.102103Ext.103104Ext.104105Ext.105@[Dev:sip:[email protected]:5060;transport=udp, Dev:sip:[email protected]:5060;transport=udp, Dev:sip:[email protected]:5060;transport=udp, Dev:sip:[email protected]:5060;transport=udp, Dev:sip:[email protected]:5060;transport=udp]

10:47:44.113 [CM503010]: Making route(s) to <sip:[email protected]:5060>

10:47:44.109 [CM505003]: Provider:[sipgate] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] Transport: [sip:192.168.1.105:5060]

10:47:44.106 [CM503001]: Call(78): Incoming call from 07920793656@(Ln.10001@sipgate) to <sip:[email protected]:5060>

10:47:43.942 [MS201000] Use STUN server 'stun2.3cx.com:3478'

10:47:43.941 [MS101004] STUN server address 'stun1.3cx.com:3478' is incorrect

10:47:41.903 [CM504001]: Ext.103: new contact is registered. Contact(s): [sip:[email protected]:5060;transport=udp/103]

 

[frydendal]

It´s woork fine om my system - I have some nokia cellphone with SIP phone like E51, E65, E66 and N95 8 GB and when the phone is not reg. by using WLAN or 3G on the system the calls will be forw. to the mobilenumber.

Maybe BluePosition is the solustion for you?... http://www.blueposition.com

Frydendal