fwd.pulver.com registration

[Hoover87]

FWD registration

Has anyone gotten FWD to work with V5 yet?

 

[silentfun]

what do you mean with FWD ?

forwarding ext. to a extern nummber like your cellphone ?
then i can state with yes.

if you are in trouble with taht it is possible a outbound rule config issue.

Andy

 

[silentfun]

ok you have changed the suject to: fwd.pulver.com registration

now i don´t know how to help you.

thought you mean the internal forwarding.

But the best chance for get fast information is the
"VOIP provider configuration"
Categorie

Andy

 

[Hoover87]

fwd.pulver.com

Ya, that question was destin for disaster right out of the gate....

I was reffering to fwd.pulver.com

freeworlddialup.com

I can get it to work using x-lite and v3, but not v5 3CX.

From the fwd server I get a Status 600: Too frequent requests

The fwd server is unhappy with something, but that something is not a problem with v3 or x-lite.

I've searched high and low, tried different source identification values, read the posted paper on source identification a few times, etc..

I'd just like to know if anyone has made it work with v5, because I can't figure it out.

The 3cx server is using private IP space behind NAT. I tried to use the fwd stun server that is listed on their site, but still no success.

 

[silentfun]

Too frequent requests possible means that the v5 try to register to often in a too short period. can you post the log ?

perhaps you can change in VOIP Provider setings the "Time between registration attempts (in seconds)" field.

ansd youst a sugestion leave the server running some hours sometimes it registers after some time. Don´t know why but have this effect some times.

Andy

 

[Hoover87]

More silliness......

I plugged the fwd.pulver.com settings into my 7960 and worked great, but 3cx v5 still doesn't work.

Not much in the log to post:


17:56:11.734 LineMgr:nRegUpdAor Unregistered line: L:10000(880031)
17:56:11.734 ClientRegs:nFailure [CM504007]: Next attempt to register 10000@880031 is scheduled in 1 minute
17:56:11.734 ClientRegs:nFailure [CM504005]: Registration failed for: 10000@880031
17:56:11.453 ClientRegs::Register [CM504003]: Sent registration request for 10000@880031
17:56:10.640 LineMgr:nRegUpdAor Unregistered line: L:10000(880031)
17:56:10.640 ClientRegs:nFailure [CM504007]: Next attempt to register 10000@880031 is scheduled in 1 minute
17:56:10.640 ClientRegs:nFailure [CM504005]: Registration failed for: 10000@880031
17:56:10.390 ClientRegs::Register [CM504003]: Sent registration request for 10000@880031
17:56:06.625 LineMgr:nRegUpdAor Unregistered line: L:10000(880031)

 

[bhavank]

its working fine with V5 for us try this

Registrar/Proxy Hostname or IP fwd.pulver.com
Registrar/Proxy Port 5060

Outbound Proxy Hostname or IP fwdnat.pulver.com
Outbound Proxy Port (default is 5060) 5082

do not select support reinvite.

try this way and let us know....

 

[Hoover87]

Thanks for the reply....I'll give it another try and report back.

It's too bad this system (3cx) doesn't play with NAT better. Having to use the proxy is kind of ghetto in this day and age.

 

[Hoover87]

Still doesn't work. This is pretty weak.

Same results.

 

[bhavank]

Then i think there is some issue with your network setup. As the system is working fine since the time of your query we have set it up and its up and running fine till now..... we had no issues with it....