- Joined
- Nov 12, 2007
- Messages
- 135
- Reaction score
- 0
I have setup a 3CX Box and it's perfectly working since install, i have a hardphones and softphones on it.
The setup is is as follows:
3CX:
Port Mapping:Every need it port mapped
pstn line: linksys 3102
Ext: 301 as external & bind to media server
STUN: stun.3cx.com
BT-102: On different network behind router
DHCP: OK
STUN: stun.3cx.com
Nat Traversal: YES = detected NAT type is full cone
NAT: FULL CONE
STATUS: registerd = YES
Local SIP PORT: 5060
Local RTP Port: 5004
Can do:
Can make call from the external BT-102 to PSTN Numbers via 3CX and internet every call its fine and works perfectly:
Can't do:
If i call pstn >> 3CX PSTN(linksys 3102) and dial extension 301(bt-102 external) it rings and i can see even the number but when i hook off there is no sound, and on the other end it's like the transfer music.
Estrange:
It works perfect extension 301 on the softphone x-lite as external both ends.
Any help
I trying everything related to nat and firewall behind the hardphone even map the ports and nothing same result:
Here es the last log lines:
02:24:16.453 StratInOut:
nHangUp [CM104007] Call(3): Call from Ln:10001@Telnor (7008110) to 301 has been terminated by Ln:10001@Telnor (7008110); cause: BYE; from IP:172.16.4.200
02:23:52.359 MediaServerReporting:
TMFhandler [MS211000] Call(3) Ln:10001@Telnor (7008110): DTMF (RTP) from 172.16.4.200:16430 arrived. in-band DTMF tone detection is turned off.
02:23:47.812 CallLegImpl:
nConnected [CM103001] Call(3): Created audio channel for Ln:10001@Telnor (7008110) (172.16.4.200:16430) with Media Server (172.16.4.90:7004)
02:23:47.781 CallConf:
nIncoming [CM103002] Call(3): Incoming call from 6646318163 (Ln:10001@Telnor (7008110)) to sip:%[email protected]
The setup is is as follows:
3CX:
Port Mapping:Every need it port mapped
pstn line: linksys 3102
Ext: 301 as external & bind to media server
STUN: stun.3cx.com
BT-102: On different network behind router
DHCP: OK
STUN: stun.3cx.com
Nat Traversal: YES = detected NAT type is full cone
NAT: FULL CONE
STATUS: registerd = YES
Local SIP PORT: 5060
Local RTP Port: 5004
Can do:
Can make call from the external BT-102 to PSTN Numbers via 3CX and internet every call its fine and works perfectly:
Can't do:
If i call pstn >> 3CX PSTN(linksys 3102) and dial extension 301(bt-102 external) it rings and i can see even the number but when i hook off there is no sound, and on the other end it's like the transfer music.
Estrange:
It works perfect extension 301 on the softphone x-lite as external both ends.
Any help
I trying everything related to nat and firewall behind the hardphone even map the ports and nothing same result:
Here es the last log lines:
02:24:16.453 StratInOut:
02:23:52.359 MediaServerReporting:
02:23:47.812 CallLegImpl:
02:23:47.781 CallConf: