Linksys (SIPURA) SPA3000 FXS and FXO Registration

[akjon RooSho]

I know this is silly to ask. But has anyone configured Linksys SPA3000 with 3CX V16!
Can anyone help me with the complete procedure?

I've tried searching in google and in this forum but was not helpful.
I couldn't even resister 3cx extension on it.

Any kind of help would be appreciated.
Regards

 

[craigreilly]

3cx local to SPA or in the cloud?

 

[akjon RooSho]

3cx local to SPA or in the cloud?

3CX is locally installed to the same network with SPA

 

[leejor]

Did you give the 3K a static IP? Are you trying to register the FXS,, FXO, or both? It's best (and easiest) to get the FXS working first. What error, or other messages, do you get in the 3CX Activity Log?
Did you do a search (Google, or on the forums) for using an SPA3102 with 3CX? It was the replacement for the 3000 and there may be more posts about that model, Almost all settings will be the same.

 

[akjon RooSho]

Did you give the 3K a static IP? Are you trying to register the FXS,, FXO, or both? It's best (and easiest) to get the FXS working first. What error, or other messages, do you get in the 3CX Activity Log?
Did you do a search (Google, or on the forums) for using an SPA3102 with 3CX? It was the replacement for the 3000 and there may be more posts about that model, Almost all settings will be the same.

I'm only trying with FXS right now. I've configured it with STATIC IP.
There's nothing regarding to the extension I'm trying to configure with SPA 3000. I've googled with SPA3102 also. But nothing is helping me out.
This is the procedure I tried but didn't work,
http://techzilla.com.au/configuring-linksys-spa3102-voip-gateway-for-3cx-phone-system/

 

[leejor]

If it is just the FXS, then it will be similar to other SPA type devices (SPA-2102, SPA1001, PAP2T, etc). Menus are all very similar.

Server (3CX IP), extension and password, possibly Auth code, all from the extension you created in 3CX.
Post the LINE page from the 3K if you are still having issues.
Do you see an Activity Log, in 3CX, that shows a registration attempt? If not, then perhaps the network settings are not correct, or incomplete.