Provisioning used polycom 501

[abelaguilar]

I have a used polycom 501 that is not loading up its boot server. I would like to use it for 3cx.

Can someone walk me through the process of adding the necessary software to the polycom 501 so that it boots up and picks up an ip a ddress from 3cx?

It looks like this phone was used for some ohter pbx system.

Thanks

right now, when I turn the power on for the phone it starts booting and finishes with could not contact boot server "error loading 0004f4......cfg" This look like some config file.


Thanks
again

 

[abelaguilar]

FINALLY!!!

I got it to boot correctly. Now I just have to enter my extension settings.

 

[5qg4]

My email is 5qg4 (at) ccx.ath.cx

Please email following information for me.

1. Extension number and extension's password
2. 3CX BOX IP
3. FTP server IP
4. FTP ID and Password for the Phones
5. Polycom Phone's MAC address ( I got it at your FTP log)

Referred to your FTP server log. There is not found bootrom.ld and 0004f211461d.cfg

Please make sure that the root directory must contains bootrom.ld, sip.ld, sip.ver, sip.cfg, 0004f211461d.cfg and phone-0004f211461d.cfg

Without the above informations I cannot create following files for you:
sip.cfg
0004f211461d.cfg
phone-0004f211461d.cfg

 

[abelaguilar]

Thanks again for all your help. I finally got it working.