Reinstall new version / can't call outside

[wilco]

i have install te last version again to try a little bit more.

but the incomming call is working but outgoing is not working.

can i try somthing to test it

info
________________________
username : 31418700000
pass : (uw wachtwoord)
display name : 0418700000
autorisation username : wilco000000
sip domain : solcon.nl
sip realm : solcon.nl
sip listen port: 5060
proxyserveradres: sip.solcon.nl
proxyserverpoort: 5060
registrationserveradres: sip.solcon.nl
registrationserverport: 5060
codecs : G729a, G711a law, G723

 

[RobLloyd]

Please place an outbound call and post the server status results so we can see what your server is doing.

 

[wilco]

22:35:02.578 Call::Terminate [CM503008]: Call(3): Call is terminated
22:35:02.562 Call::RouteFailed [CM503014]: Call(3): Attempt to reach "041865****"[sip:041865****@192.168.20.100] failed. Reason: No Answer
22:35:02.562 CallLeg:nFailure [CM503003]: Call(3): Call to sip:041865****@sip.solcon.nl:5060 has failed; Cause: 408 Request Timeout; internal
22:34:30.343 MediaServerReporting::SetRemoteParty [MS210002] C:3.2:Offer provided. Connection(transcoding mode): 87.195.51.213:9004(9005)
22:34:30.140 CallCtrl:nSelectRouteReq [CM503004]: Call(3): Calling: VoIPline:10000@[Dev:sip:3141878****@sip.solcon.nl:5060]
22:34:30.125 CallCtrl:nSelectRouteReq [CM503010]: Making route(s) to "0418653***"[sip:0418653***@192.168.20.100]
22:34:30.125 MediaServerReporting::SetRemoteParty [MS210000] C:3.1:Offer received. RTP connection: 192.168.20.3:16452(16453)
22:34:30.125 CallLeg::setRemoteSdp Remote SDP is set for legC:3.1
22:34:30.125 Extension:rintEndpointInfo [CM505001]: Ext.100: Device info: Device Identified: [Man: Linksys;Mod: SPA-921;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Sipura/SPA921-4.1.10(b)] Transport: [sip:192.168.20.100:5060]
22:34:30.109 CallCtrl:nIncomingCall [CM503001]: Call(3): Incoming call from Ext.100 to "041865****"[sip:041865****@192.168.20.100]

 

[wilco]

kick >>> kick

 

[archie]

Try to change codecs priority on Linksys or disable G729 at all.

 

[wisecomputers]

did you make sure the number is in the accepted source list?

 

[wilco]

where can i find that accepted source list?