Unable to make internal calls

Status
Not open for further replies.
OK

Decided to set up new system dedicated to the 3cx

I can now make internal calls ok and receive calls for the voip provider line.

Only problem I have now is that I can not place a call via the voip line.

15:27:08.515 Call::Terminate [CM503008]: Call(16): Call is terminated
15:27:08.203 Call::RouteFailed [CM503014]: Call(16): Attempt to reach [sip:[email protected];user=phone] failed. Reason: Not Found
15:27:08.203 CallLeg::onFailure [CM503003]: Call(16): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:91.151.2.130:5060
15:27:07.578 CallLeg::onFailure [CM503003]: Call(16): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:91.151.2.130:5060
15:27:06.562 CallCtrl::onSelectRouteReq [CM503004]: Call(16): Calling: VoIPline:10000@[Dev:sip:[email protected]:5060, Dev:sip:[email protected]:5060]
15:27:06.375 CallCtrl::onIncomingCall [CM503001]: Call(16): Incoming call from Ext.10 to [sip:[email protected];user=phone]
15:18:14.359 FaxCfg::updateContact [CM504008]: Fax Service: registered as sip:88@3CXPhoneSystem with contact sip:[email protected]:5100;user=phone
15:18:13.328 FaxCfg::updateContact [CM504010]: Fax Service: unregistered contact sip:88:5100;user=phone
 
Thats seem your voip provider does not accept numbers as username in sip request. Maybe you need to check right settings at your VOIP provider.
 
Just relised what the problem was, in the outgoing rules the default was to strip off the 1st dialed digit. I set this to 0 and everything works fine.
 
Ah. Maybe. So all works fine? :P
 
Seems OK

Thanks Very Much :P
 
Just wondering if it's possible with the free version to have an extension that's outside the local LAN, ie. connected to a different broadband connection via a router.

We have this from our current provider as their server is somewhere else. I can take any phone and connect to a DHCP enabled network and it will just connect up.
 
Yes, 3CX client use miniVPN driver to access to main office.
 
How do I do that? Thanks
 
Check manuals of 3cx
 
Several spam posts were deleted - sorry for incovenience.
vali
 
You can still run an extension from a different LAN using a standard ATA or IP phone. The 3CX has to be on a LAN with a router that has either a fixed public IP address or you have to be using a DDNS solution. The remote extension has to have a way of knowing where to register. You should use STUN at the remote and you may have to forward one or more ports in the remote router so incoming messages get to the phone. Set up the remote extension with a fixed IP, not DHCP.
 
Status
Not open for further replies.

Latest Posts

Forum statistics

Threads
111,885
Messages
589,545
Members
164,744
Latest member
johnblackwood1