Solved V20 install SBC on Raspberry Pi

[RDWild]

The SBC install is failing on a Raspberry Pi with a V20 install. Getting the following:

2024-05-21 18:56:14 (23.7 MB/s) - written to stdout [26298/26298]



Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)).

OK

connecting https://xxxx.xx.3cx.us

Ign:1 http://downloads-global.3cx.com/downloads/debian bullseye InRelease

Err:2 http://downloads-global.3cx.com/downloads/debian bullseye Release

404 Not Found [IP: 104.18.40.127 80]

Reading package lists... Done

E: The repository 'http://downloads-global.3cx.com/downloads/debian bullseye Release' does not have a Release file.

N: Updating from such a repository can't be done securely, and is therefore disabled by default.

N: See apt-secure(8) manpage for repository creation and user configuration details.

error: Cannot install the 3cxsbc package

admin@GBSBC:~ $

 

[TheodorosG_3CX]

Have you ensured that you are following the guideline below?
https://www.3cx.com/docs/installing-pbx-raspberry-pi/

 

[RDWild]

Yes, that is the guide I followed.

 

[TheodorosG_3CX]

You have used the Raspbian image?

 

[RDWild]

Yes, there may be something wrong with this Raspberry Pi though. I done these before, this one behaves very oddly.

 

[TheodorosG_3CX]

This has been tested several time and there is no issue.
Maybe something related with network configuration?

 

[RDWild]

I have actually used the exact same setup before with no issue. I haven't had a chance to test further, but this install of Raspbian or the hardware seems to be borked. I can no longer launch Chromium.

 

[Alphabetic]

Launch chromium? the Pi image used doesnt have a gui.

 

[TheodorosG_3CX]

Also you are trying to install Debian11 directly.
Refer to the previous reply with the guideline and use the Raspbian image and make another attempt:

 

[RDWild]

It's all taken care of. Several times in the past, I used a Canakit raspberry pi with NOOBS, and installed an OS with a GUI. For whatever reason, that seems to be no longer working. I installed the raspbian image, and all is good.

 

[TheodorosG_3CX]

Glad to know this is resolved